Reviews Living

Shopping arduino mega motor shield has never been easy. You may come many of website, read arduino mega motor shield reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.

Related posts:

Best arduino mega motor shield reviews

1. Arduino Motor Shield REV3 [A000079]

Feature

Control speed and direction for two DC motors, or just speed with four DC motors; drive a large stepper motor up to NEMA 17.
Connect other sensors and actuators through the shields Molex connectors.
Connect more to your board! It works also for up to four (external) relays or solenoids.
Works with your Arduino Uno, Uno SMD, Mega, and Leonardo.
External power input to separate the motor power from the microcontroller one.

2. DFRobot Romeo - a Robot Control Board with Motor Driver based on Arduino

Feature

Romeo is an All-in-One Arduino compatible microcontroller especially designed for robotics applications from DFRobot
Romeo is a robot control board based on Arduino Uno. It has built in 2x2A DC motor drivers and socket for bluetooth / APC220 communications. The integrated sensor shield allows it connect hundreds of different sensors.
It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and can easily be expanded with your Arduino-comaptible shields
The integrated 2 way DC motor driver and wireless socket allows you to start your project immediatly without the need for an additional motor driver or wirless shield.
You can Download User Guide on this page for more information. (Technical Specification - User Guide). Any technical issues after purchase please contact with our tech-support team: [email protected]. Product wiki >>> https://wiki.dfrobot.com/DFRduino_Romeo-All_in_one_Controller_V1.1_SKU_DFR0004_

3. Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit

Feature

New version 2.3!
Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!

4. Motor Drive Shield L293D Compatible With Arduino Uno Duemilanove Mega AVR Atmel by Atomic Market

Feature

A monolithic integrated, high voltage, high current, 4-channel driver
Size:6.8cm x 5.5cm x 2cm - 2.68inch x 2.17inch x 0.79inch.
Tested compatible for Arduino Mega, Diecimila & Duemilanove
2 external terminal power interface, for seperate logic/motor supplies
High Quality Atomic Market Product

5. HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi

Feature

This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.
Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.
Tested compatible for Arduino Mega, Diecimila & Duemilanove.
2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter.
Multi-function, easy to operate, a strong driver library support and feature updates.

6. OctagonStar L293D Motor Drive Shield for Arduino or UNO R3 AVR

7. Cytron 10A Bi-directional DC Motor Driver Shield for Arduino, 7v-30v, peak 15A

Feature

Bi-directional control for 1 brushed DC motor.
Support motor voltage ranges from 7V to 30V (Rev2.0).
Maximum current up to 10A continuous and 15A peak (10 seconds).
3.3V and 5V logic level input.
Fully NMOS H-Bridge for better efficiency and no heat sink is required.

8. FTCBlock 2pcs L293D Motor Drive Shield for Arduino Duemilanove Mega UNO R3 AVR ATMEL

Feature

L293D is a monolithic integrated, high voltage, high current, 4-channel driver
Up to 4 bi-directional DC motors with individual 8-bit speed selection
Can drive 4 DC motors or 2 stepper motors or 2 Servo.
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping
4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 10V DC.

9. HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

Feature

Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
Stack design can be directly plugged into the Arduino, easier to use.
Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.

10. KOOBOOK 1Pcs L298P Shield R3 Motor Driver Module Expansion Board H-Bridge 2A For Arduino UNO 2560

Feature

The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
It lets you drive two DC motors with your board, controlling the speed and direction of each one independently.
You can also measure the motor current absorption of each motor, among other features.
Motor drive voltage: external input 3-35V, internal input: 6-12V
Max current 2A per channel or 4A max (with external power supply)

Conclusion

By our suggestions above, we hope that you can found the best arduino mega motor shield for you. Please don't forget to share your experience by comment in this post. Thank you!