Reviews Living

When you want to find brewing mill, you may need to consider between many choices. Finding the best brewing mill is not an easy task. In this post, we create a very short list about top 10 the best brewing mill for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 brewing mill:

Related posts:

Best brewing mill reviews

1. Kegco KM11GM-3R Grain Mill with 11 lb. Hopper and 3 Rollers

Feature

Barley crusher and grain grinder with 11 lb. Capacity grain hopper
Heavy-duty three-roller mill with adjustable secondary gap-spacing
Integral drive shaft and axles
Mill can be hand-cranked or motorized with a corded electric drill
You will need to supply or build a base

2. FERRODAY 2 Roller Crusher Stainless Steel Crusher Malt Mill Homebrew Grain Crusher Manual Grain Mill Low Speed Drill Available Malt Crusher Gap Adjustable Barley Grinder - No Wooden Base Version

Feature

Healthy Material: Food Grade Stainless Steel for 2 rollers & all of the small screws. Aluminium Alloy for crank handle & hoppers. Stainless steel crusher is anti- corrosion, and environmental friendly, has good heat resistance, wear resistance, strong enough to last a lifetime.
7.7lb & Adjustable Rollers: 1MM hardened thickness hopper can holds up to 7.7LB grain at one time. Adjust the Roller Clearance: At first, loose the 2 knobs on both ends of the malt crusher, then adjust the gap according to the dial (0.025-0.1 inch) to obtain a right clearance for your grain.
Drill Mode & Removable Crank Handle: You can remove the handle of this grain mill to attach a 3/8 inch drill at 200-300 RPM (Don't run at a very high speed ). Aluminum Alloy Handle is anti- corrosion, anti-skidding, more portable, and more beautiful than steel handle.
Powerful 12TPI Knurl: Strong 12 TPI knurl rollers to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging.
Widely Used: This grain roller mill is designed for grains used in beer brewing, it can be used to crush barley, wheat, and malt etc. Can not be used to crush corns,soybeans, or sugarcanes.

3. Northern Brewer - Hullwrecker 2-Roller Grain Mill with Metal Base and Handle

Feature

Perfectly milled grains, ease of use and superior dependability. Look no further than the Hullwrecker grain mill.
Fully adjustable roller gap from 0.025 all the way to 0.1, allowing you to finely tune the crush to your extract preference.
INCLUDES a custom-designed all metal base that fits perfectly on any standard 5 or 6.5 gallon bucket. Other grain mills expect you to provide your own base.
Other features include a 7lb capacity grain hopper, sealed roller bearings (not bushings), and an ergonomic comfort-grip crank handle.
Hullwrecker can also be driven by an electric drill.

4. FERRODAY 2 Roller Stainless Steel Malt Crusher Heavy Duty Malt Mill Homebrew Grain Crusher Adjustable Barley Grinder Low Speed Drill Available Manual Malt Mill Stainless Steel Mill - Medium

Feature

Large 7.7LB Hopper : Upgrade thicker hopper can holds up to 7.7 lb grains at one time. Large capacity for you to handle large batches of brewing. Especially designed for malt, barley, and wheat, not recommend for corns and soybeans.
Powerful Knurls & Adjustable Clearance: 5-inch rollers, 12 TPI knurl, efficiently pulls all your grains through while leaving the hull intact to form an excellent filter bed for sparging. The clearance of two rollers is adjustable to acquire a fineness of the rollers from 0.025 to 0.1 inch. A great helper for your homebrew!
Strong Drill Mode: Try to attach an electric drill and give your arm a rest! Gives a throughput of 7 pounds in just one minute! much more powerful than traditional manual mode. ( 3/8 inch, low speed drill) If you're brewing large batches, or want to maximize mash efficiency at any volume, you should definitely try the powerful drill mode!
Healthy Food Grade Material: All the screws and rollers are made of food grade stainless steel, solid and healthy. Less weight aluminium alloy for crank handle and hoppers, anti-corrosion and solid to last a lifetime. Less weight is more portable! Customized base can fit on a standard 5 gallon fermenting bucket. Which is great hardness, odorless and environmental friendly. (bucket is not included)
Life Time ServiceWe are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support.

5. MRbrew Malt Crusher, 2 Bearing Rollers Grain Malt Mill, Barley Grinder with Wooden Base for Homebrew

Feature

[Adjustable Roller Gap]--Rollers gap distance is adjustable from 0.025 to 0.1 inches, Adjust the rollers gap according to the density of the grain, Makes grinding malted and unmalted grains a breeze
[Rugged Bearing Rollers]--2 Rollers are 304 Stainless Steel, This mill uses bearings for the 2 rollers, Bearings rollers will last much longer than bushings rollers, Excellent material, You can use this malt crusher for life
[High Capacity&High Efficiency]--Large grain hopper can hold 7LB at one time, is easily under 10 minutes to run all the grain through twice, This crusher Improves work efficiency and saves your time efficiently
[2 Grinding Mode]--Works well with the handle crank and LOW speed electric drill, Freely switch between Manual Crank and Electric Drill Mode, The end of the drive shaft where the handle(or power drill)attaches takes an 8mm hex socket, This stainless grain mill makes your homebrew easier
100% LIFELONG ISSUES SOLVING FOR YOUEach MRbrew malt crusher is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!

6. Homebrewers Outpost - MILL500 The Barley Crusher Malt Mill

Feature

Designed for brewing beer
Hopper holds 7Lbs
6061 aluminum body
5 inch
Includes a hand crank but 3/8 drill can also be used

7. Monster Mill - 3 Roller Mill with Base and Hopper

Feature

Heavy duty, fully adjustable 3 roller mill
Includes the mill, hopper and base - assembly required
6 lbs per minute output
6" long by 1.5" diameter steel rollers
Hand crank optional - this mill comes with drill connection for using power drill

8. Homebrewers Outpost - MILL710 MaltMuncher 3 Roller Grain Mill

Feature

3 Roller mill designed for homebrewing
Adjustable cold rolled steel rollers are 5" long by 1.25" in diameter
12 lb capacity hopper
Includes crank handle and can be used with drill (recommended 200 rpm)
6061 aluminum body for rust free performance

9. Barley Grinder Machine, 2 Roller Manual Adjustable Malt Crusher Barly Grain Mill with Cleaning Brush, Use for Beer Brewing Grain Mill Homebrew

Feature

Function: Barley Crusher Grain Mill is specially designed for grain crushing for beer brewing, helping you to crush grain easily. This is an ideal gift for beer brewers and kitchen lovers.
Easy to use: Malt Crusher for Beer Brewing supports manual shaking, and can also be driven electrically by a wired electric drill. Adjustable rollers at both ends support adjustment between 0-0.065".Comes with screws and wrenches to help you assemble or repair. Cleaning wooden brush helps you clean after use. Suitable for beginners or proficient.
High quality: Malt Mill is made of high quality stainless steel metal material. Support multiple reuse.
Including: Grain Mill Homebrew includes 1 malt mill, 4 funnel stainless steel plates, 1 hand crank, 1 brush, 1 bagged screw and 2 rollers. Can help you effectively crush the grain.
Compatible: Barley Crusher Grain Mill is suitable for brewing grains of beer, such as barley, wheat, malt, etc. Does not support large particles such as soybeans, corn, sugar cane, etc.

10. Brewland Grain Mill Brewing for Grain Malt Barley, Malt Mill for Homebrew Beer, Grain Crusher Grinder with 7.7LB Hopper 2 Stainless Steel Bearing Rollers and Steel Metal Base, Fit Electric Drill

Feature

Brewland Grain Mill, Born for Brewing! - This grain mill is for homebrewing beer, crushes the grain, malt, and barley more precisely with its 8 calibration knob to adjust the spacing of the rollers from 0.025 to 0.1 inch, allowing the brewer to release the malted sugars stored inside grains without ruining the husks. Please note it can not be used to crush corns, coffee beans, soybeans, or sugarcanes, and can not mill grains into powder
2 Grinding Modes - You can either manually mill the grains by the labor-saving long crank handle, or attach your low speed 1/2" or 3/8" electric drill to the end of the drive shaft which has an 8mm hex socket, combining with bearing rollers for easy crushing
7.7LB Large Capacity Hopper - The hardened hopper can hold up to 7.7LB grains at one time
Solid Steel Base - The sturdy metal base is large enough to fit on any standard 5 or 6.5 gallon bucket ( 11.8-13.8 inch in diameter ). Two M6 screws connect the metal base with the mill body securely
Premium Quality and Exquisite Surface - Brewland grain crusher select 2 high stand 12 TPI knurl stainless steel rollers, anti-corrosion, ensure the long-time use and good flavor of your beer. With a much thicker and stronger mill body structure, no need to worry about the grain grinder deformation. With exquisite hygienic aluminum anodized body and shinning stainless steel rollers, its not only a grain mill tool but also a very nice gift for you and your friends

Conclusion

By our suggestions above, we hope that you can found the best brewing mill for you. Please don't forget to share your experience by comment in this post. Thank you!