Reviews Living

There are many reasons you might choose to buy dresser rails replacement set but it is not easy to find the best suitable dresser rails replacement set for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best dresser rails replacement set.

Related posts:

Best dresser rails replacement set reviews

1. Liberty D68816C-W-TS 16-Inch Bottom Mount Drawer Slide

Feature

Made from stamped steel with a white epoxy finish
Self-closing functionality ensures that drawers stay firmly closed
Rated for normal-duty use (loads up to 50 lbs)
3/4 extension opening allows for the majority of the drawer to be accessed
Detailed instructions and mounting hardware are included

2. PRIME-LINE R 7240 Drawer Side Track Back Brackets , White

Feature

White nylon construction
Fits on side mounted systems
Used on side mounted drawer track systems
Easy to install

3. Prime-Line R 7227 Rear Drawer Track Back Plate Support and Maintain Alignment of Bottom/Side Mounted Drawer Glides, 5/16 in. x 7/8 in., Plastic, White, 1 Pair (1 LH, 1 RH)

Feature

SUPPORT DRAWER GLIDES These rear drawer track back plates are used to support side mounted drawer glides.
DIMENSIONS - 5/16 in. wide x 7/8 in. tall x 3 in. deep openings. The 2-7/8 in. socket depth allows for front to back adjustment of the drawer slides.
EASY INSTALLATION Installation is quick and easy, and all fasteners are included.
DURABLE Constructed of a thick, durable white plastic, these rear drawer track brackets are designed to last.
MAXIMUM LOAD RATING The maximum load rating is 75 lbs. per pair.
NOTE - Double check all measurements on your drawer slides before ordering

4. Prime-Line Products R 7321 Prime-Line Drawer Track Guide and Glide, Plastic, Dark, 2-pack, Brown

Feature

HIGH QUALITY REPLACEMENT Broken furniture? Dont toss it fix it! This R 7321 Drawer Track Guides and Glides pack is the perfect fit to fix your drawer system on a variety of furniture items.
EACH KIT INCLUDES 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides, and 8 Phillips drive, pan head screws for installation of guides.
EASY INSTALLATION With these furniture drawer guides, installation is quick and simple it will be the easiest part of your replacement or restoration project!
PERFECT FIT These guides fit the Kenlin Rite Trak 1 system and are made of brown plastic. Please note, a metal track is required with these guides, but is not included.
INEXPENSIVE FIX Whether youre fixing a dresser drawer system or restoring a vintage hutch, these R 7321 drawer track replacement guides and glides are a quick and inexpensive fix.

5. Prime-Line R 7211 Drawer Slide Kit Replace Drawer Track Hardware Self-Closing Design Fits Most Bottom/ Side-Mounted Drawer Systems 17-3/4 Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

Feature

INSTALL OR REPLACE DRAWER TRACK HARDWARE Whether you are installing new drawers or repairing one that wont open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers.
SELF-CLOSING DESIGN The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2 from the end of the 17-3/4 long tracks when closing.
EASY TO INSTALL Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Lines website.
75 LBS MAX LOAD CAPACITY The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 18 deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks.
INSTALLATION TIP The clearance required between the drawer and the drawer opening for these slides is: 1/2 on left and right sides, 1/4 at the bottom and 5/8 at the top.
For all dimensional information please refer to the line art and compare to your needs before purchasing
Installation fasteners and instructions are included
For further dimensional information, please see the line drawing

6. Prime-Line MP7210 Drawer Slide Kit, 15-3/4 in, Steel Tracks, White Powder Coat, (1 set)

Feature

Used to replace damaged or missing drawer track hardware
For use in 16 in. deep drawer cabinets
White powder coated finish
Steel tracks with flat plastic wheels
1 Set includes hardware for one complete drawer
For further dimensional information, please see the line drawing

7. Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 12 Inches, 1-Pair

Feature

Made from high-grade cold rolled steel that is electron plated
100-Lbs max weight capacity
Length: 12-inch (305mm)
Smooth glide ball bearing drawer slides less noise at closing and opening
Set includes 1 pair of slides and 12 screws

8. Liberty D68812C-W-TX 12 Bottom Mount Drawer Slide

Feature

Made from stamped steel with a white epoxy finish
Rated for normal-duty use (loads up to 50 lbs)
3/4 extension opening allows for the majority of the drawer to be accessed
Self-closing functionality ensures that drawers stay firmly closed
Includes mounting hardware and installation instructions

9. Liberty D68814C-W-TX 14-Inch Bottom Mount Drawer Slide

Feature

Made from stamped steel with a white epoxy finish
Self-closing functionality ensures that drawers stay firmly closed
Rated for normal-duty use (loads up to 50 lbs)
3/4 extension opening allows for the majority of the drawer to be accessed
Detailed instructions and mounting hardware are included

10. Yoohey Metal 13.5 inch Drawer Slides, Ball Bearing Two Way Slide Track Rail 0.7 inch Wide 1 Pair

Feature

Package includes:1 Pair x Drawer Slide (mounting Screws are included here). Note: Please read the installation step in detail when you installation.
Function: Soft close function avoids noise during the push-pull, makes it quieter, and the slow closing prevents your baby's hands from being clamped by the drawer.
Material: Drawer rails work harden cold rolled steel with zinc plated finish will give you precise thickness and smooth surface. They are wear-resistant, hard and smooth.
Design: 17mm drawer slide is designed with multiple fixed hole positions for easy installation and adjustment. 2 Sections, Stainless steel balls in the ball positioning groove which can stable ball sliding direction, not easy to derail.

Conclusion

By our suggestions above, we hope that you can found the best dresser rails replacement set for you. Please don't forget to share your experience by comment in this post. Thank you!