All in all, we spent hundreds of hours combing through thousands of user reviews to put together a comprehensive list of the best dso138 mini oscilloscope on the market. We then delved into these dso138 mini oscilloscope further and put together detailed reviews so that you can easily pick the best dso138 mini oscilloscope for your needs.
Rank
Product Name
Score
Related posts:
Best dso138 mini oscilloscope reviews
1. JYETech DSOShell Fully Assembled Portable Oscilloscope w/Enclosure & 10x BNC Probe by NooElec. Low Cost Digital Storage Oscilloscope with 2.4" TFT LCD. Model DSO150 (DSO 150); SKU 15001
Feature
DSO Shell is a budget-friendly, beautiful, portable oscilloscope with 2.4" color TFT LCD!Includes a 1x/10x BNC oscillscope probe and enclosure. FULLY ASSEMBLED! Just add a power supply and start testing!
DSO150 has similar bandwidth as DSO138 but contains significant improvements in structure, mechanics, and operation
DSO150 runs on 9V power supply (do not use voltage higher than 10V!) The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided to connect to different power sources
Nooelec is an authorized seller of JYEtech products. Original product guarantee: Each product contains 8-character unique JYETech product ID (PID, can be found on sticker or power-up screen). Buyers are encouraged to verify product genuineness by emailing the PID to [email protected]
2. kuman DSO 138 DIY Oscilloscope Kit Opening Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD pre-soldered
Feature
Dso138 2. 4" Tft 1msps digital oscilloscope kit for DIY it's easy to solder.Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly
It uses 2. 4-Inch tft lcd (320 x 240 dot-matrix, 262K colors) as its display element and displays nice
Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.
7-24 friendly customer service provided.
3. JYETech DSO Coral Pocket Battery-Powered Oscilloscope w/ Color Touch Display (DSO112A)
Feature
Low-cost pocket oscilloscope with a 2.4" touch-panel color displayDesigned from the ground-up for intuitive operation
Integrated li-ion battery allows for easy use in the field, lab and workbench
2 MCX to clip probes are included
Integrated square wave generator for quick testing and calibration
4. JYETech 'DSO Shell' Oscilloscope DIY Kit w/Enclosure & Clip Probe by NooElec. Low Cost Digital Storage Oscilloscope with 2.4" TFT LCD. Model DSO150 (DSO 150); SKU 15001K
Feature
Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are includedDSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4" color TFT LCD (320x240) display and optical encoder for navigation
We strive to send the most current revision available. The current PCB version shipping for this listing is revision 'E', which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec's or JYETech's website
Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase
24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise
5. DSO 138 Mini Oscilloscope DIY Kit w/Clip Probe by Nooelec. Low Cost Portable Digital Storage Oscilloscope with 2.4" TFT LCD. Model DSO138Mini; SKU 13805K
Feature
The DSO138mini is an upgraded version of the popular DSO138 DIY oscilloscope kitAll parts required for completion are included, along with assembly instructions and a user manual
The scope can run on USB or a single cell 3.7V Li-ion battery
The overall size of DSO138mini is only 2/3 of DSO138, so it is much more suitable for hand-held operation
There are a variety of other improvements, which can be viewed in the full description that appears below
6. KKmoon Mini Digital Scope Meter DIY Kit JYE Tech DSO138 SMD Parts Pre-soldered Electronic Learning Set 1MSa/s 0-200KHz
Feature
//2.4-inch color TFT LCD with 320*240 resolution displays parameters clearly. Make MCU and LCD stay in one PCB to avoid problematic pin-header connections.//Overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation. Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery.
//Can be connected with computer for data transmission. DSO138mini has improvements in firmware, too. Its trigger can work reliably under 10us and 20us timebase settings. With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
//Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any time waveform display (HOLD function). Waveform storage function: will not lose the waveform after power off.
//Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function. All SMD parts has been soldered and the MCU has been programmed.
7. Acrylic Protection Case for DSO138 Mini Digital Oscilloscope DIY Anti Scratch Cover Transparent Shield by YDZN
Feature
Material: AcrylicBig panel size: 91x81mm/3.58x3.19inch
1 Set Acrylic Protection
Notice: DSO138 mini Oscilloscope is not included.
8. YEAPOOK ADS5012h Handheld Digital Portable Oscilloscope Mini Storage Oscilloscope Kit with 100MHz Bandwidth 500MS/s Sampling Rate 2.4'' TFT LCD Display
Feature
: 100 MHz analog bandwidth,Real-time sampling rate up to 500MSa / s and the price is moderate.: 2.4'' color TFT- LCD display with 320 x 240 resolution.
: Ultra small form factor easy to hand-held and carry. it's always ready when you need it.
: The built-in 64 MB flash storage for up to 2000 waveform images.The storage process is easy and fast.
: Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.
9. Kuman Handheld Digital Oscilloscope, 5 MHz Bandwidth, 20MS/s Sampling, 2.4 inch Display 320 240 Resolution Mini Storage Oscilloscope (5M Oscilloscope)
Feature
5 MHz Bandwidth: The oscilloscope's real-time sampling rate is up to 20MS / s and the analog bandwidth is 5MHz. Aperiodic digital signaling can be used freely.Storage and Deletion Function: It is with 16M storage space, and very convenient and fast to store waveform. Support for thumbnail browsing, detailed information viewing, page turning, delete waveform functions etc. .
2. 4 Inch Color Display: A high-definition LCD screen with 2. 4-inch 320 * 240 resolution. It also support day mode and night mode display. And when Waveform refresh, the screen doesn't flash.
Portable: The Mini oscilloscope is built-in 1200mAh rechargeable lithium battery, it can be used continuously for 3 hours when fully charged. Equipped with an efficient one-button, the measurement waveform can be displayed without complicated adjustments.
High measurement voltage range: 1X can measure 0~40 V, 10X can measure 40~800V. Up to 11 parameters measured: VPP Vmax, Vmin, Vavg, Vrms frequent, Duty +, Duty-, Time +, Time-, Time.
10. DSO 138 Oscilloscope Kit Open Source with Probe 2.4" TFT 1Msps Digital Oscilloscope Kit with DSO 138 Case + Probe 13803K for Electronic Learning Set
Feature
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.
Partially open-sourced,the MCU has been programmed.The oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.The case is unassembled and requires assembly.
Adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users.
