What are the best eemersontool clamp currently available to purchase? This article attempts to give you some answers to guide you in the process of purchasing the best eemersontool clamp to suit your needs. In our buying guide, we outline certain features to consider when buying eemersontool clamp. It is important to take time and research before you commit to purchasing.
Rank
Product Name
Score
Related posts:
Best eemersontool clamp reviews
1. IRWIN QUICK-GRIP Bar Clamp, One-Handed Clamp/Spreader, 24-Inch (1964720)
Feature
New Quick-Change button easily converts clamp to spreaderNew removable, swivel jaws and non-marring pads
I-beam bar design reduces bending and flexing even under extreme pressure
300 lbs of sustained clamping pressure
One-handed Quick-Release trigger releases the clamp instantly
2. E. Emerson Tool Co. C24 24-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
Feature
STRAIGHT EDGE - E. Emersons Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle.NO C-CLAMPING - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.
EXTRA WIDE - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts.
FLAT TOP - The extra low profile and flat top makes it easier for all circular saw or router straight cuts.
CONTRACTOR SERIES - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories."
3. E. Emerson Tool Co. CT24 24-Inch All-In-One Contractor Twin Straight Edge Bench Clamp and Tool Guide
Feature
Companion to the Contractor series, the Contractor Twin is a doubled sided clamp with one side facing down to clampThanks to their lower profile, twin clamps are especially effective when used in pairs for glue ups
Space between jaws is 24-1/4", width is 4-1/4"
Contractor Twin Clamps are designed specifically for assembly projects but can also be used as a basic straight edge clamp
One clamp faces down to hold your work table, the other clamp faces up to hold your project
Pairs of Twin Clamps simplify assemblies and hold work pieces for planing or sanding
Recessed tracks accept Contractor series Saw Plate, Router Plate and Stop Block but will not work with A, Twin or Ultra series accessories
Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
4. Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050
Feature
GET IT STRAIGHT This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill.CONTRACTORS COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.
LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge.
AS LONG AS YOU NEED Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, youll save time and eliminate waste due to crooked, uneven cuts.
5. Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50 Clamp Edge and Saw Sled That Allows For Straight, True Cuts
Feature
EVERYTHING YOU NEED FOR STRAIGHT CUTS The 50 clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw.WORK TOGETHER FOR PRECISION The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true.
WORKS WITH ALMOST ANY MAKE/MODEL SAW Works with most makes and model circular saw, both in right handed and left handed configuration.
EASY TO USE The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.)
6. E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool
Feature
Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clampSize: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
7. PONY Heavy Duty Metal Spring Clamps Set 2-inch, 1-inch Jaw Open, with Protective Handles and Tips, 10-piece
Feature
Lot of 8*1-inch Jaw Open Size and 2*2-inch Jaw Open Size Spring Metal ClampsNickel-plated Steel Jaws for Longer Tool Life
Heavy duty tempered steel springs for fast, reliable opening and closing
Poly-vinyl handles and tips for comfort and protection
Point-of-pressure remains near jaw tips for positive clamping
8. EACHPOLE |10-Pack| Heavy Duty Nylon Spring Clamps 4.5 inch for Home Improvement Projects and Photography Studios, APL1770
Feature
4.5 inch long spring nylon clamp - Comes with 10 piece setMade of strong and rugged type of plastic - Heavy Duty
Movable tips for maximum flexibility and tension
Tempered steel spring applies consistent pressure
Provides instant holding power and is easy to re-position during assembly, fastening, and gluing work
9. JORGENSEN 2-pack Ratchet Bar Clamps Set, Medium Duty, 12-inch One Hand Clamp, E-Z Hold Expandable Spreader
Feature
The throat depth is 3-1/3 inch, the maximum opening capacity is 12 inch and the Normal load limit is 300 lbs.Exclusive patented feature to expand the opening capacity by joining two clamps together with no tools or added accessories needed.
Easily converted to a spreader clamp, comfortable one-handed clamping.
With soft and durable plastic pads, contoured comfort grip and quick release lever.
Suitable for a wide range of woodworking & DIY projects. These unique bar clamps are ideal for hobby, craft and model projects.
10. ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)
Feature
No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dados and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
