Reviews Living

When you looking for f3 flight controller osd betaflight, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable f3 flight controller osd betaflight is not an easy task. In this post, we show you how to find the right f3 flight controller osd betaflight along with our top-rated reviews. Please check out our suggestions to find the best f3 flight controller osd betaflight for you.

Related posts:

Best f3 flight controller osd betaflight reviews

1. iFlight SucceX-E F4 MPU6000 Flight Controller GPS F4 FC Built-in OSD BEC Current Sensor Black Box for FPV Racing Drone Quadcopter

Feature

The design of SucceX-E series is based on the SucceX series, focuses on quality, the SucceX-E series is more affordable
This flight controller is ready for anything with 4 uarts, 8mb blackbox and a powerful F4 processor to run it all
Built-in OSD; Four LED plugs
Double 5V/3A BEC circuit, one BEC for flight control power supply, one BEC for LED power supply
36x36mm PCB with 30.5mm mounting holes, 4mm with Grommets 3mm,Weight: 7.6g

2. FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM

Feature

This insanely tiny 2.4GHz diversity receiver available from FrSky is the next big thing in miniaturization of racing craft.Perfect for those racers who are looking to lower their AUW. FULL RANGE, so identical to your X4R and D4R setups.
XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time
Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E X12S transmitter.
weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone .
FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.

3. YoungRC APM2.8 Flight Controller Board Built in Compass Straight Pin for RC F450 S500 Quadcopter Drone

Feature

This version eliminates the 1.0mm 6P SM06B GPS interface of V2.52 old version, change it into DF13-4P I2C external compass interface.
Put DF13-5P GPS interface with external compass interface, convenient for the connection of GPS and external compass.
V2.52 I2C interface changes to multifunctional MUX interface
Modified version added isolation resistor, when the OSD interface used with telemetry, the interfaces is effectively avoided
The new version adopts US LP2985-3.3, 16V withstand voltage, more reliable, redcucing the possibility of Bad Gyro health

4. BETAFPV 2S F4 FC AIO Brushless Flight Controller No RX ESC OSD Smart Audio for 2S Brushless FPV Whoop Drone Meteor75 Beta75 Pro 2 Beta65 Pro 2

Feature

Suitable for a lighter 2S whoop drone, like Meteor75 Beta65 Pro 2 or Beta75 Pro2 etc. It intergrated a Betaflight F411 processor FC, Betaflight OSD, 1-2S 5A ESC. Saving more weight for 2S drone to get faster fly experience.
The 2S F4 FC AIO Brushless Flight Controller builted without receiver, but all the ports are available on this board. Compatible receivers signal include SBUS, IBUS, Spektrum Frsky DSM2/ DSMX etc except PPM.
The power supply is 1-2S, it comes with JST-PH 2.0 connector in default, pilots can use 2pcs 1S 300mAh battery work on this. If you want to use it with 2S battery, please change the cable to XT30 : www.amazon.com/dp/B07FFQ2TXQ
This 2S F4 AIO FC is supported programable LED but without alarm buzzer on it.
The FC can be used on 2S brushless whoop drone Beta75X and Beta65X, performance very well even no wash-out issue then, so you can just take this AIO FC to replace the stock FC&ESC.

5. Quanum Illuminati32 10DOF Naze32 Flight Controller with Built-in OSD CleanFlight V2

Feature

Combined 32-bit Flight Controller and OSD
32-bit ARM microprocessor for fast speed and fast response
Acrobatic, auto-level, heading hold, head-free and altitude hold modes
KV OSD giving real-time and accurate flight data superposed on screen
Gyro, accelerometer and pressure sensor

6. HITSAN Spcmaker SPC 3.5g 20x20mm Omnibus F3 Flight Controller AIO Betaflight OSD BEC and Video Filter for RC Drone One Piece

7. USAQ Naze32 F3 Evo Brushed 32-Bit Flight Controller for 1S/2S 720-1050 Motors

Feature

STM32F303CCT6 + MPU6500 F3 Platform
Supports up to 6 motors at 2.5A per motor
Supports 1S (4.2V) or 2S (8.4V) input voltage

8. Super_S Flytower Omnibus F3 Flight Controller Built In Betaflight OSD Dshot 6A 4 In 1 ESC BLHeli_S

Feature

Support BLheli/BLHELI_S suite Pass-through ready
Support programmable LED Sprit (turn off transponder before using)
Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Default Dshot600
Built-in voltage detection, alarm

9. F7 AIO Flight Controller SpeedyBee Betaflight Bluetooth 8Pin Connector w/OSD Current Sensor Barometer 5V for RC Drone

Feature

F7 AIO Flight Controller- Support OSD and 4in1 ESC 8 PIN connector or Solder Pads Two connection methods
Black box- 32MB on board data flash and 6-layer PCB make it more solid and has External GPS(I2C)
Better support for high currents- 5*5.0V/1 * 9.0V Output(Max.2.5A) and 3s - 6s Lipo Input
Battery Monitoring- With Current Sensor 200A and Integrated Barometer and RSSI input, safer flight
Built-in Bluetooth Chip- Zero configuration, connect to the Speedy Bee App directly after powering on, easy to set the FC parameters

10. F4 V3 Flight Controller Board Built-in OSD Barometer for Wizard X220S Martian II 220mm FPV RC Drone

Feature

STM32 F405 MCU, Dshot support.
Secure digital memory card blackbox, Baro(BMP280)
MPU6000 6 axis SPI Gyro & Accelerometer, SBUS/PPM AND Spketrum dsm-x Ports
Drag and Drop OSD configured via Betaflight Configurator
Smartaudio v2 support Tune your PIDs and configure the omnibus F C from your Transmitter

11. Betaflight F3 Micro 6A 2S 4-in-1 Brushless ESC OSD Flight Controller Micro Cube

Feature

Tiny and light flight controller and ESC system for micro drones.
Compatible with Betaflight, iNav, Cleanflight and More
Supports Betaflight OSD integrated into the flight controller
Comes with manual for quick installation, setup and configuration.

12. HGLRC F4.V2 Flight Control Betaflight Flight Controller Board OSD FC 5V BEC for XJB F413 F428 F438 F440 Series Stack RC Racing Drone

Feature

Efficient & Lightweight F4 . V2 FC more powerful STM32F405RGT6 MCU operating at a higher frequency , making everything run smoothly . You can add GPS and anything else you like freely because the CPU utilization is low . suitable for mini indoor outdoor racing drone quadcopter
High-end quality Supports the input voltage up to 4S LiPo battery. Comes with heat resistance damping ball to upgrade the stability and operation . Built-in Betaflight OSD to adjust PID , Support SBUS/PPM/DSMX receiver , high quality durable suit
Real customers' review ran it through beta flight and put a battery in it, took it outside, And started flying and it flies very smooth and is stable and couldnt be happier. This is our first 250 mm build and are very pleased with how it turned out so far. It is now encouraged us to continue to build these and go even further and faster and higher.
Easy Operation Size: 25x25mm board, 20mm mounting holes (M2) , Very easy to welding , friendly to beginner or professional racing drones
Why Choose Us We are the Original HGLRC manufactory , If there are any question or need help , pls feel free to contact us , we will always here help you out within 24 hours . Choose us risk free today. Click the Orange Button to Buy Now :)

13. Rcharlance, VX20 Flytower F4 Flight Controller Ori32 25A 4IN1 ESC Blheli_32 2-4S LipoDshot1200 up to 32kHz Built-in Betaflight OSD to Adjust PID for 90mm to 140mm FPV Racing Drone Frame

Feature

*This Built-in Betaflight OSD Flytower F4 Flight Controller Ideal for For 90mm TO 140mm FPV Racing Drone Frame
*Micro F4 Flight Control Boar Input Voltage: 2-4S Lipo; Built-in Betaflight OSD to adjust PID; BEC Output: 5V@3A; Size: 25x25mm board, 20mm mounting holes (M2); Board Thickness: 1.2mm
*The VX20 Flytower F4/F3 Flight Controller was designed basing on F4SD(Betaflight) FC and highly integrated with OSD, BEC, 4 in 1 BLHeli_32 / Dshot 1200 ESC and VTX. It will basically meet all the features you need in FPV.
*Ori32 25A 4IN1 ESC 25A continuous current, 30A burst 32bit compatible ESC (Blheli_32), Dshot1200 up to 32kHzIncredibly small size,
*Very light weight, Auto timing feature; Build in current sensor; Smooth response ; Compatible to Beta flight F3/F4 flight controllerLipo input: 2-6S; Size: 40*32*6mm;

14. BETAFPV F4 FC 1S Brushed Flight Controller with SPI Frsky Receiver OSD Smart Audio for FPV Tiny Whoop Micro Racing Drone

Feature

The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Designed to work with current Tiny Whoop or Blade Inductrix setups
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only. Upgraded to 30A Lower Resistance MOSFET, Firmware version: betaflight_matekf411rx_3.4.0. Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode). Support Smart Audio.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions

15. Jullynice Crazybee Tiny Betaflight F3 Flight Controller with Flysky Receiver/Blheli_S Esc/Osd/Current Meter for Rc Whoop Racing Drone

Feature

Built-in Flysky receiver with telemetry AFHDS/AFHDS-2A compatible.
Built-in Betaflight OSD(SPI Controll).
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor).
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready;Support BLHeliSuite programmable.
Support Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM.

16. Coach f3 betaflight 3.2.0 Flight Controller OSD + 4 in 1 5a 1s Brushless ESC Rodalind

Feature

OMNIBUS F3+4 IN 1 5A ESC
100% brand new and high quality
Give you the highest service experience
If you encounter any problems, our team is at your service 24 hours, you can rest assured to buy

Conclusion

All above are our suggestions for f3 flight controller osd betaflight. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using f3 flight controller osd betaflight with us by comment in this post. Thank you!