When it comes to choosing your fc vtx combo, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best fc vtx combo. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best fc vtx combo.
Rank
Product Name
Score
Related posts:
Best fc vtx combo reviews
1. AKK X2-Ultimate 5.8GHz 0.01mW/25mW/200mW/600mW/1000mW Switchable FPV Transmitter Compatible with Betaflight OSD FC Configuring Upgraded Long Range Version
Feature
0.01mW/25mW/200mW/600mW/1000mW power switchableSupport parameter adjusted and work with Betaflight,fligth controller,OSD
Super mini size and light weight,One button frequency and power setup.
With MIC, 7-26V input and can be provides 5V output for your camera.
Compatible with betaflight 3.2 and 3.3, Filtered power ensure super clean video, born for racing.
2. iFlight SucceX-E 2-6S Mini Flight Stack F4 Flight Controller MPU6000 + 4 in 1 35A ESC BLHeli_S for FPV Racing Drone Quadcopter
Feature
SucceX-E 2-6S Mini F4 Tower is specially designed for mimi FPV racers, mini new compact and concentrated into a two-layer tower structureThe mini FC and ESC neatly stack together, highly integrated with all the latest features, optimized internal circuitry, make your build easy to assemble and cleaner looking
The mini FC and ESC Plug-and-Play, no need to solder tiny wires
Mini F4 flight control has been optimized overall. The built-in OSD chip helps to monitor the status of the flight data any time; 8mb blackbox and a powerful F4 processor to run it all
2-6S BLHeli_S ESC support DShot DShot150/300/600/MultiShot/ OneShot etc; support 2-6S Lipo Input
3. AKK Nano 3 5.8GHz 25mW/200mW VTX Support OSD Configuring with Mounting Hole for Runcam Micro and Foxeer Micro
Feature
SUPPORT Betaflight 3.35V output for your camera
0.01mW/25mW/200mW switchable
One button frequency and power setup
Support OSD Configuring via Betaflight Flight Control Board
4. AKK A5 5.8Ghz 25mW FPV Transmitter 600TVL CMOS Micro Camera Support OSD Switchable Racebandfor Quadcopter Drone Like Tiny Whoop Blade Inductrix
Feature
Easy to install, plug and play, power by 1S LiPo batteryVideo out cable can be connect to OSD
Super light weight: 4.5g, VTX Size: 19*14mm(L*W), Camera Size: 14*14mm(L*W).
Button control instead of switches to change channels,120view angle camera, good quality image with zero latency.
Suitable for Ultra Micro RC FPV Quadcopter and Fiber Frame Kit, designed for all ranges of flying both indoor or outdoor.
5. BETAFPV F4 FC 1S Brushed Flight Controller DSMX Receiver ESC OSD Smart Audio for Tiny Whoop FPV Micro Racing Drone
Feature
BETAFPV F4 FC 1S Brushed Flight Controller Integrated DSMX receiver and OSD. NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module. For some Spektrum radio transmitter like DX6i/DX6e etc, the DSMX receiver may have a horrible range with your radio transmitter, please change the mode to DSM2 (DSMX in default).The binding procedure is different from before, there is no bind button on it, just set in betaflight and then power on, more details checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
The F4 brushed FC board bring a new era in FPV whoop technology. Improved on 3 points: STM32F411 100MHz high performance MCU, 30A lower resistance MOSFETs and polar reversed protection. All of these is backed by the same reliability and warranty of all BETAFPV FC boards.
Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings.
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
6. AKK FX2-ultimate 5.8GHz VTX with MMCX Support OSD Configuring via Betaflight Flight Control Board Long Range FPV Transmitter
Feature
0.01mW/25mW/200mW/600mW/1000mW power switchable7-26V input and can be provides 5V output for your camera
With MIC,support OSD Configuring via Betaflight Flight Control Board.
Filtered power ensure super clean video, born for racing. One button frequency and power setup.
Compatible with Betaflight 3.2 and 3.3, 0.01mW power with zero interference,Compatible with Betaflight OSD FC.
7. AKK FX2-R 5.8Ghz FPV VTX 25mW/200mW/500mW/800mW with MMCX to RP-SMA Support OSD Configuring via Betaflight Flight Control Board
Feature
25mW/200mW/500mW/800mW power switchable7-24V input and can be provides 5V output for your camera.
Support OSD Configuring via Betaflight Flight Control Board
Filtered power ensure super clean video, born for racing. One button frequency and power setup
COMPATIBLE with Betaflight 3.2 and 3.3, 0.01mW power with zero interference,Compatible with Betaflight OSD FC
8. AKK FX2-ultimate-mini(US Version) 5.8GHz 37CH Smart Audio VTX Support OSD Configuring via Betaflight Flight Control Board Long Range FPV Transmitter
Feature
25mW/200mW/600mW power switchableSolder pads connector, One button frequency and power setup.
With MIC, 7-26V input and can be provides 5V output for your camera.
Filtered power ensure super clean video, born for racing.
OSD configuration using smart audio,Support parameter adjusted and work with Betaflight,fligth controller,OSD
9. HolyBro GetFPV Kakute F7 V1.5 - Tekko32 BLHeli32 4-in-1 ESC - Atlatl HV V2 Stack
Feature
32bit ESC with BLHELI32 firmwareSupports 3-6S Lipo input
PWM input, TLM supported
Voltage output (VBAT)
NO BEC
10. Team Blacksheep TBS Unify Pro32 Nano 5G8 400mW Video Transmitter
Feature
Smallest, lightest video transmitter on the marketUp to 500mW of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race. Now with team-race capability!
Easy OSD, FC and RC channel changes, with fallback button menu
11. Flysky Goggles Version DIY Mobula 7 V3 Combo with TX Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX Arch Apron for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75 (16000KV)
Feature
- New Crazybee F4 PRO Flight controller 1-2s Lipo compatible- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Flysky version support both AFHDS and AFHDS-2A protocol
12. HGLRC Red F4 Zeus35 AIO 3S - 6S FD411 Flight Controller Stack 35A BLS 4in1 ESC Electronic Speed Controller 20X20 M2 M3 for RC Racing Drone Quadcopters & Multirotors (Old)
Feature
Efficient & Lightweight F4 Zeus35 Flight Controller built-in 35A BLHELI_S 4 in 1 ESC Electronic Speed Controller , tiny size , ONLY 10g , great items for 2in -5in mini indoor outdoor racing drone quadcopter micro class racersHigh-end quality Built-in current sensor and support SBUS/PPM/DSMX receiver , high quality durable suit for most of RC drones quadcopters
35A 4 in 1 ESCOriginal Parts support DSHOT 600 / 300 / 150 / Oneshot125 / Oneshot 42 / MultiShot / Damped Light mode
Easy Operation Dimension: 40x32mm board, 20mm mounting pattern (M2/M3) , Very easy to welding , friendly to beginner or professional racing drones
Why Choose Us We are the Original HGLRC manufactory , If there are any question or need help , feel free contact us , we will always here help you out within 24 hours . Choose us risk free today. Click the Orange Button to Buy Now :)
13. HolyBro GetFPV Kakute F7 V1.5 - Atlatl HV V2 Stack
Feature
Supports Betaflight, Butterflight, and Cleanflight.Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
Soft-mounting built in. The IMU ("gyro") chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
High-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz sampling rate.
Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.
14. BETAFPV A01 AIO Camera 5.8GHz (0/25/200mW) VTX Transmitter 800TVL NTSC/PAL OSD SmartAudio for 2-4S Tiny Whoop Drone(Pin-Connected Version)
Feature
A01 AIO CameraBETAFPV A01 AIO camera integrated with A01 VTX, 5.8GHz FPV Transmitter, C01 FPV micro Camera and Dipole Whip Antenna. Ultra-lightweight only 3.26gC01 CameraComes with C01 FPV Micro camera, which adopted a 1/4'' CMOS sensor, 2.1mm lens for 800TVL resolution and excellent latency while minimizing the weight to 1.4g
Easy to InstallC01 camera features a JST0.8 connector, Dipole Whip Antenna can be pluggable to VTX. Special design in plug-and-play makes it easy to install without soldering
SmartAudioIncluded with SmartAudio function. FC can communicate with the VTX by using the audio line-in. The Frequency & Power on VTX can be changed through the transmitter. Switchable power includes 0mW, 25mW and 200mW. The voltage of 2.9V- 5.5V. Support NTSC system, and vertically inverted image switch
PitModeSupport PitMode, power up VTX during race events without interfering
15. BETAFPV Meteor65 Acro 1S Brushless Whoop Drone DSMX with 19500KV 0802 Motor BT2.0 Connector F4 1S Brushless FC V2.1 Micro Tiny Whoop FPV Acro Whoop Drone
Feature
BT2.0 ConnectorThe Meteor65 1S whoop drone comes with BETAFPV exclusive designed BT2.0 connector, which can support 9A continuous current and 15A burst while the PH2.0 connector just supports 4.5A continuous current. Solving the low voltage warning issue of PH2.0 connector on 1S brushless whoop when you start flying19500KV 0802 Motor&31mm PropsEquipped with 0802 19500KV motor, the KV value is lower than racing version, which makes the flight time up to 4min. Suitable for indoor and outdoor flight for beginners
F4 1S Frsky FC&M01 AIO CameraBETAFPV newest and lightest F4 1S brushless FC and M01 AIO camera. Its a perfect combo which has better performance on function for maximum weight savings
Meteor65 FrameNew marvellous design with 3.2g ultra lightweight. Compared to previous 65mm brushless frames, motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. It provides you more durable and smoother flight experience
Package&SupportMeteor65 upgrade to a kit, it is with abundant accessories of 2 lipo batteries, BT2.0 charger & tester, extra props, 1 screwdriver and the portable bag. Any problem please contact us via Email [email protected]
16. HAPPYMODEL DIY Drone Set Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop (16000KV,with DSM/2DSM/X RX)
Feature
Flight controller: CRAZYBEE F4 PRO Firmware , Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready , Built-in 5V 1A Buck / Boost with LC filterFrsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM/2DSM/X version support DSM/2 and DSM/X compatible for Spektrum transmitter
Betaflight support , multi flight mode: ACRO/AIR/ANGLE ? Onboard 4in1 ESC
17. Parts & Accessories in Stock Rush FPV Tank Stack Rush CORE F7 & Matrix 32bit 30A ESC VTX 25-800MW FPV Combo Multi Rotor Parts for FPV Racing - (Color: FC with VTX)
Feature
Color: FC with VTXPackage Includes: 1 x RUSH CORE 7 Flight Controller | 1 x RUSH MATRIX 30ABlheli_32 4 in 1 Brushless ESC | 1 xRush Tank Mini VTX(Optional) | 4 xM2 Nut | 4 xM2x25mm Screw | 5xShort Lsolation column | 5xLong Lsolation column | 2 xSH1.0 3Pin Lock connection cable (60mm For receiver and LED strip) | 2x
Compact size,super power.
Available with external mic.
English Manual,
18. HolyBro Kakute F7 HDV Tekko32 F3 4in1 45A Combo - Work with DJI FPV VTx Module.
Feature
High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the KAKUTE F7 HDV monitors voltage directly from the power supply.
Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up to 2A to DJI FPV VTx.
Supports BLHeli pass-through for easy ESC upgrade and configuration.
