It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 galvanized pipe cutter tool. Its followed by an in-depth review of each galvanized pipe cutter tool. Hopefully, once you are done reading this article, you will be well informed about galvanized pipe cutter tool and be able to select the right galvanized pipe cutter tool for you without any hesitations.
Rank
Product Name
Score
Related posts:
Best galvanized pipe cutter tool reviews
1. Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter
Feature
Cuts up to 1 schedule 40 pipe and 2 copper tubing,Tubing capacity is 5/8" - 2-1/8" and 1" pipe.
Tubing cutter wheeled can be replaced with item # 42348
Cuts and deburrs a wide variety of pipe and tubing.
Tubing capacity 5/8" to 2-1/8" O.D.
2. Superior Tool 02802 2" Heavy Duty Pipe Cutter-Cast Iron Pipe Cutter for 1/2" to 2" Schedule 40 Pipe
Feature
Wire looping and bending holesIt also has easy to read wire gauge marking on both sides of the tool for stripping in either directions
The handle is color coded, red meaning stranded wire
Cuts 1/8" to 2" iron and steel pipe
Replacement wheels available
Durable and reliable
3. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter
Feature
Cuts hard and soft copper, aluminum, brass and plastic tubingSpecifically designed for use in restricted spaces on small diameter tubing
Strong, lightweight slide and wheel housing and large knurled feed screw knob provide easy control of cutting pressure for clean cuts
Tubing cutter has a 1/8-inch to 5/8-inch (3 mm to 16 mm) cutting capacity
RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
4. RIDGID 32820 Model 2-A Heavy-Duty Pipe Cutter, 1/8-inch to 2-inch Steel Pipe Cutter
Feature
Ideal for fast, clean pipe cutting by hand or powerFeatures an extra-long shank that protects adjustment threads
Extra-large handle allows for quick and easy adjustments
Can be converted to 3-wheel cutter by replacing rollers with cutter wheel
Pipe cutter has a 1/8-inch (3 mm) to 2-inch (50 mm) pipe capacity
5. Master Plumber 745122 5/8 To 2-1/8-Inch Large Pipe Tube Cutter
Feature
Cuts larger tubingUse to cut 5/8" to 2-1/8" outer diameter tubing
Long lasting construction
6. Ridgid 29963 Model 35S 1/4" To 1-3/8" Stainless Steel Tubing Cutter With X-Cel Knob, Silver
Feature
6 individual bearings replace traditional rollers, creating a smoother cut and allowing for increased speed around the tubeContoured frame allows for easy alignment while adjusting the cutter to make a cut
Features a specially designed stainless steel cutter wheel that contains bearings in the hub, decreasing drag around the tube for a smoother cut
Ergonomic knob allows for easy adjustments
Steel tube cutter has a 1/4-inch to 1-3/8-inch (6 mm to 35 mm) cutting capacity
7. RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch Tubing Cutter
Feature
Featuring a 2-in-1 design, the tube cutter can be used alone or with the attachable, light and ergonomic ratchet handleDesigned to cut hard and soft copper, aluminum and brass
Cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once
Tubing bender has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity
Rugged and compact ratchet handle attaches to cutter for easier cutting in tight, restricted spaces; handle can be operated in ratchet steps as small as 10 degrees
8. Shop-Tek No.2 Heavy Duty Pipe Cutter, 1/2" - 2" O.D. with One Extra Cutting Wheel
Feature
Heavy Duty Malleable Steel FrameHardened Alloy Steel Cutting Wheel
Extra Large T-Handle Screw Feed for Precise Adjustment of Cutting Pressure
Parallel Guide Rollers Ensure a Square Cut
Cuts Copper and Thin-Walled Steel Pipe, Metal Conduit, Brass and Aluminum Tubing
9. TOOLTOO Tube Cutter 1/4"-1 34" - Heavy Duty Copper Stainless Steel Cutter with Thrust Bearing Tubing Pipe EMT Cutting Tool 5mm -50mm
Feature
Superior Material- Well made of high-quality alloy steel grinding blades, extremely sharp and durable.Fine Workmanship- With the spray painting treatment, ultra exquisite and beautiful, work well to prevent rust and increase the service life.
Perfect Design- Special roller bearing design, provides you with easy cutting experience.
Practical Application- A professional refrigeration tool and vehicle repair tool, suitable for cutting copper and aluminum pipes (pipe thickness: 2-3mm), and stainless steel pipes (pipe thickness: 1-2mm).
Comfortable Grip- Designed with non-slip handle, offer you comfortable grip during long-term use, will not feel tired.
10. EZARC 2-Piece Tubing Cutter Set with 3/16 to 2-inch Heavy Duty Pipe Cutter and 1/8 to 7/8-inch Mini Tube Cutter for Cutting Pipes of Aluminum, Copper, PVC, Thin Stainless Steel Tube
Feature
[Large Cutting Capacity] Large tubing cutter: cut through 1/5 to 2-inch pipes with thickness of 1/5-inch. Mini tubing cutter: cut through 1/8 to 7/8-inch pipes with maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible.[Clean and Precise Cut] 6 individual bearings allowing for increased speed and precise rolling control to make every cut smoother and moreaccurate in pipe cutting.
[Durability] Heat treated alloy steel cutting wheel and high grade steel struction make our tubing cutter heavy duty for plumbing, electical, air conditioner installation, automotive and DIY applications.
[Cutting Materials] Heavy duty for hard material like thin stainless steel and all soft tubes like aluminum, Copper and PVC from 1/8" to 2".
[Lifetime Warranty] EZARC covers its products with a quality warranty against defects in material or workmanship for the life of the tool.
