Reviews Living

It’s not that easy to choose the right lcd screen arduino 128×64 since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top lcd screen arduino 128×64 on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best lcd screen arduino 128×64 on the marketbut dont skip to the end!

Related posts:

Best lcd screen arduino 128x64 reviews

1. UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico

Feature

UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package

2. Dorhea 0.96 inch oled i2c Display Module IIC Serial LCD Screen 0.96" LED Module Display Yellow Blue 12864 oled /3.3V-5V 128 X 64 Compatible with Ardu ino Nano Display Raspberry Pi 51 Msp420 Stim32 SCR

Feature

This i2c display module is 0.96 inch diagonal,Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W,Color:Yellow Blue
The IIC address can be changed,it is convenient to use with different machines Four square holes are easy to install
0.96 Inch OLED module for showing graphical & textual information directly on your micro-controller projects. It compatible with Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32
Low-power, very legible and vibrant, a crisp screen, pixels stand out very well even in a brighter circumstances like full sunlight
Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software

3. Songhe 0.96 inch 12864 128X64 OLED LCD Display Board Module I2C IIC SSD1306 Driver 4 Pins for Arduino Raspberry Pi (Pack of 5pcs, White Light)

Feature

OLED-SSD1306, a more elaborate and beautiful screen than LCD, with more functions
High contrast, thus supporting clear display With no need of backlight
Working voltage: 3.3V - 5V; Size:0.96 inch
Communication: IIC, only two I / O ports
4-Pin anti-reverse cable; characters displayed in white
Pins already soldered

4. HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32

Feature

1.3" mini OLED display screen with 128X64 resoluction and SSH1106 chipset
Ultra-low power consumption: full screen lit 0.08w
Four fixed bolt holes for easy installation
Interface Type:SPI(Can be changed to IIC)
Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC

5. HiLetgo 1.3" IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32

Feature

Driver IC: SSH1106.Resolution: 128*64
Four square holes are easy to install
Ultra-low power consumption: full screen lit 0.08w
The IIC address can be changed,it is convenient to use with different machines
Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC etc

6. HiLetgo 0.96" SSD1306 I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color White

Feature

0.96" SSD1306 128X64 OLED LCD Display with I2C IIC SPI Serial
Drive Duty: 1/64 Duty
Font Color: White
Panel Size: 26.70mm x 19.26mm x 1.85mm
High resolution: 128 * 64

7. ACROBOTIC 0.96" White I2C 128x64 OLED LCD Display Module for Arduino, ESP8266, MSP420, STM32, 8051, Raspberry Pi LED Screen SSD1306

Feature

Operating Voltage: 3.3~5VDC
Connects via I2C to any microcontroller or single-board computer
Works with ESP8266, Arduino, 8051, MSP420, STM32, Raspberry Pi!
Pixel Color: white. Resolution: 12864 pixels; Size: 0.96in (diagonal); built-in SSD1306 driver; I2C address: 0x3C

8. IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module 4 Pin for Arduino for Raspberry Pi (Pack of 3pcs, White-IIC)

Feature

0.96" 128X64 OLED LCD Display with IIC/I2C Interface-4PIN.
Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
Easy connection of the display for Arduino, for Raspberry Pi, for 51 Series, for MSP430 Series, for STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!
128x64 pixel: please comment the default display type #define SSD_128_32 and uncomment #define SSD_128_64 at line 73 and 74 of the driver header file. Then the 128x64 pixel can be displayed normally.
Please note: The outer dimensions of White and Blue Display are slightly smaller than the Yellow-Blue Display.

9. diymore 2pcs OLED Display Module 1.3 inch 128x64 OLED Display I2C IIC Serial OLED Module with SSH1106 for Raspberry Pi and Microcontroller (White Light)

Feature

OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally.
With high resolution of 128 x 64 pixels,no need backlight and self-illumination, our OLED display Module 128x64 provides plenty of space for displaying elements.
1.3 inch OLED display module supports 160 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle.
With four square holes, diymore's I2C OLED display module can be installed easily, truly convenient to use and simple you working.
This oled display can be widely use with arduino, 51 series, MSP430 series, STM32/2, CSR IC, etc. 4pcs male pins makes the lightweight connecting easily.

10. RedTagCanada 2PCS 0.96 inch IIC Serial OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board GND VCC SCL SDA for Arduino for Raspberry Pi and 51 Series (Blue)

Feature

0.96" SSD1306 128X64 OLED LCD Display with IIC/I2C Interface-4PIN. Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements.
The IIC address can be changed, standard driver chip (SSD 1306) libraries already exist for Arduino, for Raspberry Pi and 51 Series.
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W.
Super High Brightness (Adjustable), Super High Contrast (Adjustable), Embedded Driver/Controller.
Drive Duty: 1/64 Duty, Pixels: 128x64.
Viewing angle: greater than 160 degrees
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch (approximately).

Conclusion

By our suggestions above, we hope that you can found the best lcd screen arduino 128x64 for you. Please don't forget to share your experience by comment in this post. Thank you!