Reviews Living

What are criterias of the best micro vtx osd? It is not easy to find the answer. We spent many hours to analyst top 10 micro vtx osd and find the best one for you. Let’s find more detail below.

Related posts:

Best micro vtx osd reviews

1. AKK FX3 5.8Ghz 25mW/200mW/400mW/600mW Switchable FPV VTX with MMCX Integrated OSD FC Configuring via Betaflight Flight Control Board

Feature

25mW/200mW/400mW/600mW power switchable.
Support OSD Configuring via Betaflight Flight Control Board.
7-24V input and can be provides 5V output for your camera.
VTX 5V Out for Cam, Operating Voltage: 7-24V, Output Voltage(VOUT): 5V, support 2S-6S battery only
One button setup channel/band/power with LED display,Filtered power ensure super clean video, born for racing.

2. Wolfwhoop Q5 5.8GHz VTX with IPEX Antenna Connector and 0.01/25/50/100/200mW 37CH Switchable FPV Transmitter with FC Uart Support OSD Configuring via Betaflight Flight Control Board

Feature

IPEX has more mating cycles and is more robust
You can do so with the push button on the VTX
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
This VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 16x16mm mounting pattern
FC Uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts

3. AKK FX3-ultimate 5.8GHz 25mW/200mW/400mW/600mW Switchable Mini VTX Support OSD Configuring via Betaflight

Feature

7-24V input, 5V output for your camera
25mW/200mW/400mW/600mW power switchable
With MIC, OSD configuration using Smart audio
MMCX+UFL,Solder Pads connector, One button setup channel/band/power
0.01mW parameter-adjusting Mode, power with zero interference.

4. AKK A20 5.8G Long Range VTX 25mW/200mW/600mW/1000mW Switchable DVR Transmitter Upgraded Long Range Transmitter Support OSD Configuring

Feature

The FPV VTX is an upgraded version of FX3 ultimate, with DVR
Micro VTX support Smart Audio
Antenna connector: solder pads, 7-28V input with 5V output
The VTX has long transmission distance and clear image
MMCX VTX, Dimensions: 36(W) x 36(D)mm, 30.5 x 30.5mm(hole); Weight: 9.6g

5. AKK 5.8GH 25/200/600/1000mW Switchable FPV Transmitter DVR VTX Support OSD Configuration Using Smart Audio Upgraded Long Range Version for FPV Racing Drone Quadcopter

Feature

25mW/200mW/600mW/1000mW power switchable
Super mini size and light weight,One button frequency and power setup.
With MIC, 7-28V input and 5V output for your camera.
Compatible with betaflight 3.2 and 3.3, Filtered power ensure super clean video, born for racing.
Support parameter adjusted and work with Betaflight,fligth controller,OSD

6. Wolfwhoop WT07 Micro 5.8GHz 25mW FPV Transmitter and 600TVL Camera with OSD Interface for FPV Quadcopter Drone

Feature

Power by 1S lipo battery
5.8GHz 5 bands 37 channels with Raceband: 5658-5917MHz
All in one vtx + camera + antenna, plug and play, ready to fly
Smaller than WT05, Can be directly connected to osd via Video in/Video out cable
Easy installation for racing drone, button control instead of switches to change channels and bands

7. BETAFPV Beta65S Brushed Whoop Drone 1S Frsky FPV Quadcopter with F4 1S Brushed FC M01 AIO Camera 5.8G 25mW VTX 19000KV 7X16 Motor for Tiny Whoop FPV Racing

Feature

Upgrade with F4 FC brushed SPI Frsky receiver and M01 AIO FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be set as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver.
More punch on throttle with faster 19000KV 7x16mm motors and 3-blade propellers.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions

8. Wolfwhoop Q2 5.8GHz 25mW 40CH FPV Transmitter and Micro Camera with OSD Interface for Mini Drone/RC Car/RC Boat

Feature

Low signal loss, zero latency and vivid color
Can be directly connected to osd via video in/video out cable
Split vtx + camera + antenna, plug and play, ready to fly, power by 1S LiPo battery
It's compatible with branded FPV goggles and monitors equipped with 5.8GHz receivers
Suitable for Ultra Micro RC FPV Quadcopter and Fiber Frame Kit, designed for all ranges of flying both indoor or outdoor

9. AKK Nano 3 5.8GHz 25mW/200mW VTX Support OSD Configuring with Mounting Hole for Runcam Micro and Foxeer Micro

Feature

SUPPORT Betaflight 3.3
5V output for your camera
0.01mW/25mW/200mW switchable
One button frequency and power setup
Support OSD Configuring via Betaflight Flight Control Board

10. AKK A3-OSD 5.8GHz 48CH 0.1mW/25mW/200mW Micro AIO Camera with OSD VTX Camera for FPV Racing Drone

Feature

Super light weight: 4.5g, Size: 18X13mm
CH, Band ,FR, voltage and flight time adjustable
All in one vtx + camera + antenna, plug and play, ready to fly.
with OSD,can display parameters on 5.8GHz goggles or monitors.
Customized callsign available, OV231 lens perfect for low light.

Conclusion

By our suggestions above, we hope that you can found the best micro vtx osd for you. Please don't forget to share your experience by comment in this post. Thank you!