Reviews Living

When it comes to choosing your miter jig hand saw, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best miter jig hand saw. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best miter jig hand saw.

Related posts:

Best miter jig hand saw reviews

1. BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

Feature

Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located Upfront for quick and easy bevel settings without reaching behind the saw

2. GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG

Feature

GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
Precise 1/4" thin rips
Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
Made in the USA. A true MICROJIG Innovation.:

3. Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Feature

Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.

4. Olson Saw 35-241 Fine Kerf Saw 35-550 42 tpi with Aluminum Thin Slot Miter Box, Slot Size .014-Inch, Slot Angles 45, 60, 90, Cutting Depth 7/8-Inch

Feature

Deluxe Fine Kerf Saw
With Aluminum Thin Slot Miter Box
Item Package Dimension: 13.0" L x 4.0" W x 1.5" H
Item Package Weight: 1.0 lb

5. MICROJIG - TJ-5000 MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)

Feature

Precision taper cuts as accurate as 1/8 of a degree
Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Push block
Infinite taper adjustments between 0 and 10 degrees
Two independent Memory Locks keeps angles for repeat taper cuts
Full instructional DVD and bonus project plans included

6. QWORK Multifunction 12 Mitre Box with 14 Back Saw 45 hole slot

Feature

Size: 12" Mitre Box , 14" Back Saw, 45 hole slot.
Durable: The saw blade is made of premium steel, double-sided mechanical grinding, wear-resistant, and absolutely sharp.
Ergonomic design: The handle of the saw is made of ABS engineering plastic and TPR plastic for a comfortable grip and save labor.
Safe to Use: The gap of the chute box is 2cm, the thickness of the saw is 1.2cm, when using the saw, the saw will not cut into the box.
Use Tip: Use the sides of the box to line your saw up with the correct angle. Score your cut with the saw first, making sure the cut will be on the waste side of the mark. Then, proceed to use the saw normally to cut through your piece.

7. Makita LS1219L 12" Dual-Bevel Sliding Compound Miter Saw with Laser

Feature

Unique 2-steel rail sliding system design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall
Increased capacity for up to 8" Crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90
In-front bevel lock for convenient operation
Dual dust collection ports provide excellent dust extraction performance
Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4")

8. Fuller Tool 320-0755 Ogee Cut Crown Molding Cutting Guide moulding jig hanger installation corners tool trim curved 45 degree cuts for miter saws power radial table home carpentry renovation or repair

Feature

Simplifies the process of cutting curved crown mouldings into five easy steps
Can be used with power mitre, radial and table saws; also suitable for manual mitre saws
Ideal for practically any home carpentry, renovation or repair projects
Creates snug-fitting 45-degree cuts without having to tilt the saw blade
Measures approximately: 12-1/2 in. x 4 in. x 3 in. (31 cm x 9.5 cm x 8 cm)

9. Mini Miter Saw Electric Power Table Saw Benchtop Cut-Off Chop Saw Max 45 Degree Cutting for Crafts Miniatures Metal Wood Plastic Compound Cutter

Feature

WIDELY APPLICABLE - BEAMNOVA Electric Power Miter cuts a wide variety of materials such as wood, metal, plastic, and resin. Suitable for different shapes of material like pipe, squares tube, miniature molds, and so on. Ideal for Small Hobby and DIY Crafts.
COMPLETE ACCESSORIES & PORTABLE - Measures only 10*5.5*6 in and weighs about 1.5kg / 3.3 lbs. Comes with 1 metal blade, 1 resin blade, 1 wrench, 1 clamping jig, and 1 user manual.
SMOOTH & PRECISE CUTTING - The attached angle gauge allows cutting from 0 to 45. It makes precise cuts up to 1/2" deep. It can make a cutting so smoothly and accurately that you may never have to file or sand the cutting end any more!
POWERFUL MOTOR TO SAVE TIME - Generates 4000-10000r/min and the 2-inch high-speed steel blade can cut through a variety of materials in a really short time. Get a BEAMNOVA mini table miter saw and save 10 times the time compared to cutting only by hand!
USER-FRIENDLY DESIGN - The protractor at the bottom allows the material to be cut from 0-45 degrees. Half of the blade is covered in the protective housing to protect the operator from accidentally hurting the hand. The red limit switch on the top can prevent you from misoperation. The base clamping jig can fix the machine on the desktop firmly.

10. INCRA I-BOX Jig for Box Joints

Feature

To get right to the point, the new Incra I-Box is the most advanced tool ever produced
Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs
At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery
Use it on your table saw or router table to cut great looking box joints
Reversible design works on either side of the cutter
Exclusive dual-pitch lead screw mechanism for fast micro-adjusting and a broad 1/8-Inch - 3/4-Inch range of pin widths
Exclusive INCRA GlideLOCK miter bar fits standard 3/4-Inch x 3/8-Inch miter slots with a 0.740-Inch - 0.762-Inch adjustment range
Reversible and reusable MDF sub fence dramatically reduces or eliminates tearout

Conclusion

By our suggestions above, we hope that you can found the best miter jig hand saw for you. Please don't forget to share your experience by comment in this post. Thank you!