Reviews Living

We spent many hours on research to finding network verifier, reading product features, product specifications for this guide. For those of you who wish to the best network verifier, you should not miss this article. network verifier coming in a variety of types but also different price range. The following is the top 10 network verifier by our suggestions:

Related posts:

Best network verifier reviews

1. Fluke Networks MT-8200-63A IntelliTone Pro200 Probe

Feature

Detects IntelliTone digital signals on active networks and 500 to 1200 Hertz analog signals on inactive networks to locate, trace, and isolate copper cabling
Identifies detected signals audibly and with 8 LEDs that light successively as the signal strength increases for prompt isolation of a single cable within a bundle
Sync LED shows battery strength at power up and confirms reception of IntelliTone signals
Available with a cable map function for validating RJ11 and RJ45 connectors by testing continuity and finding wiring faults on all 4 pairs of UTP and STP twisted pair cabling
Turns off automatically after 1 hour of inactivity

2. Fluke Networks MT-8200-49A Copper Tester

Feature

Imported from: Taiwan
Commercial brand: Fluke Networks

3. Fluke Networks CIQ-100 Copper Qualification Tester, Qualifies and Troubleshoots Category 5-6A Cabling for 10/100/Gig Ethernet, Coax and Voip

Feature

Qualifies cabling performance for 10/100/Gig Ethernet, tests and troubleshoots all copper media cabling: Twisted pair (Category 5 6A), coax, and audio
Includes CableIQ Qualification Tester with detachable wire map adapter, (2) RJ45/RJ 45 patch cord, USB cable, coax 'F' push on adapter, user guide, (4) AA batteries, soft carry case, 1 year warranty
Advanced troubleshooting features; Length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
Works on live networks to provide Ethernet switch detection and device configuration
Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ KIT)

4. Triplett Byte Brothers Real World Certifier 2 Ethernet Cable Category Verifier and COAX Tester with Exportable Reports (RWC1000K2)

Feature

Performance certify and troubleshoot all LAN hardware and cabling
Compatible with all 10MB, 100MB and GIGABIT networks
Test existing cables for higher speed compatibility and print "receipt" to document test results
Also works with coax cable and can test for the length of the cable, opens, shorts, wire map and distance to any faults that might exist
Includes Remote Unit, two CAT5e patch cables, two 9V batteries, and carrying case

5. Fluke Networks MS2-100 MicroScanner2 Copper Cable Verifier with Built-In IntelliTone Toning, Troubleshoots RJ11, RJ45, Coax, Tests 10/100/1000Base-T, and Voip

Feature

Copper cable verifier for testing voice/data/video with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments
Includes MicroScanner2 cable verifier with detachable wire map adapter, user guide, (2) AA alkaline batteries, carry pouch, 1 year warranty
Oversized backlit LCD screen displays clear results in bright light or complete dark with intuititive icons, shows 4 test modes at once: Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 10/100/1000 Ethernet, POTS, and PoE
Cable Tests include Length (460 meter or 1500 feet with resolution to 0.3 meter or 1 feet), wire map to TIA 568A/B standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables; PoE detection: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices to rule out power as source of problems
Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with Intellitone digital and analog toning, probe sold separately

6. Fluke Networks MS2-WM Wiremap Adapter for Microscanner2 Network Cable Tester

Feature

Doubles as a protective cap for the cable verifier
For use with MicroScanner2 cable verifier to detect all types of wiremap faults
With F-Connector and 8-Pin Modular Jack

7. Triplett Pocket CAT LAN Tester for RJ45, CAT 5/6, and Coax Cables with Instant Pass/Fail Results (CTX200)

Feature

Versatile tool tests both RJ45-CAT5/6 and Coax cables
Ruggedized for field use with no breakable LCD screen
PASS/FAIL results appear in one second and each pair's status is highlighted
Performs a complete TIA568 test: continuity, opens/shorts, reversals and split pairs
Auto-off (12 seconds) and low battery indicator help maximize your battery life

8. Klein Tools VDV501-825 Scout Pro 2 LT Network Tester / Continuity Tester for Data, Voice, Ethernet with Remotes, Adaptor and Carrying Case

Feature

Tests voice (RJ11/12), data (RJ45) and video (F-connector) coax connections
Updated model, Scout Pro 3, now available: Cat. No. VDV501-852
The self-storing Test-n-Map Remote (#1) tests, maps and IDs a cable run in a single step
Utilize the 19 LanMap and CoaxMap Location Remotes to identify cable runs
Test for open, short, miswire or split-pair faults

9. Aenllosi Hard Carrying Case for Fluke Networks MS2-100 MicroScanner/MicroScanner2 Copper Cable Verifier

Feature

Aenllosi Hard Carrying Case for Fluke Networks MS2-100 MicroScanner/MicroScanner2 Copper Cable Verifier
Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes
With Internal mesh pocket can store other accessories at your convenience
Internal size: 7*3.6*2 inch, external size:7.5*4.3*2.5 inch, weight:150g.
For sale is case only, device and accessories are not included.

10. Platinum Tools TCB360K1 Cable Prowler Cable Tester, Cable Verifier, PoE Detector, TDR, PRO Test Kit

Feature

Tests CAT3/5e/6/6a ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
Supports up to 8 testing and ID remotes for network and telephone cables and up to 20 network and coax ID-only mapping remotes
Detects presence of PoE and class of PoE per IEEE 802. 3af/at with load test for voltage drop, reports current link speed and link capabilities for active ethernet drops
Link light to identify location on a server/switch/hub/router port
View saved cable tests, define cable name, save/print ALL cable testing and network testing

Conclusion

All above are our suggestions for network verifier. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using network verifier with us by comment in this post. Thank you!