Reviews Living

Shopping for the best nodemcu esp32s kit is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy nodemcu esp32s kit. Don’t worry any more! We spend many hours to review and compare nodemcu esp32s kit to make the short list for you. Let’s check which product is suitable with you.

Related posts:

Best nodemcu esp32s kit reviews

1. DIYmall ESP32-PICO-KIT V4.1 Mini Development Board ESP32 ESP-32 WiFi Module with Male Pin Header

Feature

Document link http://esp-idf.readthedocs.io/en/latest/get-started/get-started-pico-kit.html#get-started-pico-kit-v4-board-front
The development board integrates a USB-UART Bridge circuit, allowing the developers to connect the board to a PCs USB port for downloads and debugging.
What you will get is: 1 X ESP32-PICO-Kit V4.1 mini development board

2. ACROBOTIC WeMos ESP32 D1 Mini Development Board IoT Compatible with Arduino NodeMCU Raspberry Pi Wi-Fi Module MH-ET Live MiniKit ESP-32

Feature

ESP32 Wi-Fi and Bluetooth development board compatible with WeMos D1 Mini Shields (Plug and Play)
Built-in CH340 USB to Serial UART adapter and Micro-USB connector (Plug and Play)
Pinout includes: 3UART, 3SPI, 2I2S, 18ADC input channels, 2DAC output channels, 2I2C, PWM/timer input/output available on every GPIO pin, OpenOCD debug interface, SDIO master/slave (50 MHz), external SPI flash (up to 16MB), SD-card interface support
Two diode-protected power inputs (one for a USB cable, another for a battery)
Documentation, tutorials, demos: https://youtube.com/acrobotic

3. HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE

Feature

2.4GHz Dual Mode WiFi + Bluetooth Development Board
Ultra-Low power consumption, works perfectly with the Arduino IDE
Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA
ESP32 is a safe, reliable, and scalable to a variety of applications

4. HiLetgo 0.96" ESP32 OLED ESP-WROOM-32 ESP32 ESP-32 OLED WiFi Bluetooth Development OLED Display for Arduino AP STA

Feature

Feature: Integrated antenna and RF Barron
Characteristic: 2.4 GHz dual-mode Wi-Fi
Characteristic: Bluetooth low power technology
Characteristics: Using AP, STA and AP and STA LUA program support
Strong points: A wide range of safe, reliable and scalable applications for the TSMC 40nm chips

5. MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display CP2102 Internet for Arduino ESP8266 NodeMCU

Feature

[Full documentation]: English documentation: https://robotzero.one/heltec-wifi-kit-32/; https://docs.heltec.cn/#/en/user_manual/the_upgrade_of_new_wifi_kit_32; Install guide and bunches of info: https://github.com/HelTecAutomation/Heltec_ESP32; Instructable for Internet Time: https://www.instructables.com/id/WiFi-Kit-32-NTP-Clock/ Driver Library - u8g2: https://github.com/olikraus/u8g2
[Note]: This ESP32 development board comes unassembled, soldering of headers is required. It can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR; Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please refer to this example: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/examples/ESP32/ADC_Read_Voltage/Battery_power/Battery_power.ino
[This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH; 2. Better 2.4GHz antenna design and impendence matching; 3. Basic low power design (800uA in deep sleep); 4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please refer to this example: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/examples/ESP32/ADC_Read_Voltage/Battery_power/Battery_power.ino;
5. Add Vext power output pin, users can use this pin to drive some external device (sensor, motor etc.), when system need into deep sleep mode, Vext can be turn off. This pin was controlled by GPIO21, for example: Turn ON: digitalWrite(21, LOW); Turn OFF: digitalWrite(21, HIGH);
6. New WiFi Kit 32 pinout diagram: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/blob/master/PinoutDiagram/WIFI_Kit_32(New).pdf; 7. New WiFi Kit 32 schematic diagram: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/blob/master/SchematicDiagram/New_WIFI_Kit_32_Schematic_diagram.pdf; 8. Circuit optimization, system more stable; 9. Better power manage system design.

6. DIYmall Assembled ESP32 OLED WiFi Lora Kit 0.96inch OLED Display ESP-32S WiFi Bluetooth CP2102 Development Board Lora SX1276 915MHZ/868MHZ Antenna Transceiver for Arduino ESP8266 NodeMCU Smart Home

Feature

Document link https://drive.google.com/open?id=0B8DSGdAr8_31d19WQmN6SE1fLVE
https://github.com/HelTecAutomation/Heltec_ESP32/tree/master/examples/LoRa
Compatible: for Arduino Smart Home
Main chip:espressif esp32 and sx1276
What you will get: 1pc esp32 lora oled development board(with welded pin header)+1pc antenna 915mhz + 1pc 2Pin plug cable

7. HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU

Feature

ESP32 WIFI Kit for Arduino ESP8266 NodeMCU
Driver Library - u8g2: https://github.com/olikraus/u8g2
Instructable for Internet Time: https://www.instructables.com/id/WiFi-Kit-32-NTP-Clock/; Install guide and bunches of info: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
English documentation: https://robotzero.one/heltec-wifi-kit-32/; https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
Operating voltage: 3.3V to 7V; Supports Sniffer, Station, softAP and Wi-Fi Direct modes

8. MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE

Feature

2 PACK 2.4GHz Dual Mode WiFi + Bluetooth Development Board
Ultra-Low power consumption, works perfectly with the Arduino IDE
4M Memory, Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA, Voltage for USB powered is 5V; voltage for power supply is 3.3V
ESP32 is a safe, reliable, and scalable to a variety of applications

9. KeeYees ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (2PCS)

Feature

This module is safe, reliable, and scalable to a variety of applications.
The module has 38 pins and has more features than a 30-pin module. And smaller in size, more convenient to use.
Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.

10. MELIFE 2 Pack ESP32-DevKitC core Board ESP32 Development Board ESP32-WROOM-32U for Arduino IDE

Feature

2 PACK ESP32-DevKitC core ESP32-WROOM-32U Development Board.
ESP32-DEVKITC-F V4 board with latest ESP-WROOM-32U module.
ESP32 is a safe, reliable, and scalable to a variety of applications.
Ultra-Low power consumption, works perfectly with the Arduino IDE.
See Espressif websites for technical information.

Conclusion

All above are our suggestions for nodemcu esp32s kit. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using nodemcu esp32s kit with us by comment in this post. Thank you!