Reviews Living

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 pid temperature controller kit. Its followed by an in-depth review of each pid temperature controller kit. Hopefully, once you are done reading this article, you will be well informed about pid temperature controller kit and be able to select the right pid temperature controller kit for you without any hesitations.

Related posts:

Best pid temperature controller kit reviews

1. Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter

Feature

Two ModesHave two relays. Switch between cooling and heating modes. Support F/C display.
Setting ValueControl the temperature by setting the temperature set value and the difference value.
Different FunctionsRefrigerating control output delay protection, and temperature calibrating.
Alarm for Safe Alarm when temperature exceeds the limit or when sensor error.
Power Supply 110VAC 50Hz/60Hz

2. MYPIN TA4-SNR+K Thermocouple SNR PID Dual Digital Display Temperature Controller Dual Type-K Thermocouple

Feature

BID FOR A DUAL DUSPLAY UNIVERSAL DIGITAL PROGRAMMABLE TEMPERATURE CONTROLLER, supports many type of thermocouple sensor.
7 DIFERENT DUAL OUTPUT COMBINATIONS WITH: high / low / high deviation / low deviation/ interval / out of interval /breakage alarm.
ONE KEY OPERATION, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance.
3 BUIL-IN AUTO-TUNING TIME PROPORTION PID ALGORUTHMS to choose for different applications or environments to be controlled. (for variety of industries or home projects heating or cooling applications.)
Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc.

3. Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Feature

Convenient DesignPlug and play, easy to use. Support C/F display.
Dual Relay OutputBe able to connect with refrigeration and heating equipment at the same time.
Dual Display WindowBe able to display measured temperature and set temperature at the same time.
Buzzer AlarmHigh and low temperature alarms are available when the temperature is over or the sensor is with issue.
SafetyMaximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.

4. Inkbird F Display PID Temperature Controllers Thermostat Heat Sink and Solid State Relay 100 to 240ACV ITC-106VH 40DA SSR White Heat Sink K Probe

Feature

Support reading with Centigrade or Fahrenheit unit
Dual display window, be able to display measured temperature and set temperature at the same time
Simplify operational processes and you don't need to operate more steps if you want to set the definite value
High accuracy of displaying and controlling. Manual and Auto turning are available
Operating voltage range 85110% Rated voltage

5. PID Temperature Controller Meter Indicator, Jaybva Digital Programmable Universal Thermostat Fahrenheit and C Display SSR and Alarm Output 25A Solid State Relay Thermocouple Probe Included

Feature

Dual LED Display: This PID temperature controller can read TEMPS in Fahrenheit (F) and Celsius(C) . You can choose Centigrade or Fahrenheit unit .
TC/RTD universal input , such as K , J , E , Pt100 etc. SSR solid state relay output .
Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output.
This temperature controller has built in autotuning . After you have set your temps you press and hold the blue button for a few seconds and the AT light will come on and run through an auto tuning program to get you the best PID results.
Wide Application: This pid controller ssr is widely used in auto system in line of light industry, chemistry, machine, metallurgy, ceramics, pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc.

6. Tabletop PID Temperature Controller Kit - Complete Titanium (16mm Heater)

Feature

Complete Titanium-nail Kit
PID temp controller kit and titanium accessories.
Temp ranges from 0 - 999 Fahrenheit degrees.
Quick heating-up with 150 watt PID temp controller box.
Standard 5-pin XLR plug makes it easy to fit the coil heater from other dealers.

7. Inkbird PID Thermostat F C Display Stable Digital Temperature Controller Heating Cooling Control ITC106VH 40DA SSR Output Solid State Relay Alarm K Seneor Black Heat Sink

Feature

Equipped with dual LED display
Offers display options of Centigrade and Fahrenheit
Enabling more humanized temperature control
High standard self-adjust function along with multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
Its suitable for most applications, Sous Vide, Smoker, Brewing etc.

8. Auber Instruments PID Temperature Controller,W/ 30 RAMP/SOAK,SSR Output

Feature

30 programable steps for ramp, soak and other logic actions
PID control with fuzzy logic enhancement for the best stability control
Display in either Fahrenheit or Celsius temperature unit
Support both heating and cooling mode.
Model: SYL-2352P. US Seller, ship from GA!

9. MYPIN Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy: 0.2%

Feature

Dual display for Fahrenheit(F) and Celsius(C)Range: -1999 to 9999 (depends on the input signal)
Input: Thermo Resistor: PT100, Cu50Thermocouple: K,Wre3 ~ Wre25 Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC
K type thermocouple Temperature rang:0-800, Sensor Dia: 4.5mm, Cable Length: 2m
Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V
Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet)

10. Twidec/ MV100-B10 Digital Display PID Temperature Controllers Thermostat Regulator AC 85V - 265V + K Sensor Thermocouple + Heat Sink and Solid State Relay SSR 40 DA

Feature

Product name: Temperature Controller MV100-B10 ;Product name: solid state module relay SSR-40DA, 3-32VDC/24-380VAC; Product name: K-Type Thermocouple Sensor Dia: 6mm ,Cable Length: 2m(6.6ft).
Special note: After the temperature controller is turned on, the default is degree FahrenheitDigital Display PID : Support reading with Centigrade or Fahrenheit unit factory default to Fahrenheit unit; be able to display measured and Controller temperature Display Character: PV: 4 digital 9.9mm height Red LED LettersSV: 4 digital 8mm height Green LED Letters
Controller Front Panel Dimension: DIN 48mm(W)X48mm(L) ; Mounting hole size: DIN 45mm(W)X45mm(L) Total size DIN 48mm(W)X48mm(L)X74mm(H);
Power Supply Voltage: AC 85-265V 50/60Hz Input: KPT100 can choosefactory default to K type ; Output: Solid state relay SSR ; Alarm mode: factory default to 1 way High deviation alarmcan choose;
Pacakge: 1x MV100 Controller ; 1 x 40A SSR ; 1 x K sensor ; 1x White Heat Sink ;1x English manual

Conclusion

All above are our suggestions for pid temperature controller kit. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using pid temperature controller kit with us by comment in this post. Thank you!