Reviews Living

If you looking for pla filament 1.75mm glow in dark blue then you are right place. We are searching for the best pla filament 1.75mm glow in dark blue on the market and analyze these products to provide you the best choice.

Related posts:

Best pla filament 1.75mm glow in dark blue reviews

1. Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Glow in The Dark

Feature

1.75mm diameter, 1kg net weight, PLA Filament
Filament Roundness: +/- 0.07mm
Filament Diameter: +/- 0.05mm
Recommended Print Temperature: 200 - 210C, depending on printer model
Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

2. AMOLEN 3D Printer Filament Bundle,PLA Filament 1.75mm Bundle,Glow in The Dark PLA FilamentGlow Green and Blue 3D Printing Filament Bundle,1kg X 2 Spools

Feature

GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament
UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding
HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children.
VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage

3. CCTREE 1.75mm ST-PLA (PLA+) 3D Printer Filament Accuracy +/- 0.03 mm 1kg Spool (2.2lbs) for Creality Ender 3 V2,Ender 3 Pro,Ender 3 Max,Ender 5 Pro,CR-10 V2,CR-10S Pro, Glow in The Dark Blue

Feature

[Premium ST-PLA Filaments] CCTREE ST-PLA (PLA Plus version): is a Upgrade Non brittle PLA with real good strength and impact resistance,High rigidity and Good Glossiness, It has the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
[Dimensional Accuracy & Consistency] -- CCTREE ST-PLA filaments made of Premium PLA Raw Material, advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these ST-PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .03 mm; 1 kg spool (2.2lbs).You will have Pretty good experience during Printing with useing CCTREE Filaments
[Less-tangle & Wide Compatibility]-- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking;CCTREE filament Perfect Compatible with all common 1.75mm FDM 3D printers,such as Creality Ender 3 ,Ender 3 V2,ANYCUBIC Mega S,Monoprice and other desktop 3D printers
[Clog-Free,Bubble-Free & Vacuum Packaging] Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re-sealable bag,and packed with really hard Brown Box,this allows your filament keep optimal storage before use it,enable much smoother and more stable printing.
[Eco-Friendly & Easy-to-use] 100% made of environment-friendly natural materials, harmless to users and the environment.CCTREE Filaments comply with the RoHS and Reach Certificate.PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed.No odor, no pollution and non-toxic during the printing,easy to use

4. AMOLEN Glow in The Dark Multicolor Change 5 Meter,Green,Blue and Purple,3D Printer Filament Bundle,PLA Filament 1.75mm,3D Printing Filament,200g X 4 Pack

Feature

GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament
UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding
HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children.
VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage

5. Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Glow in The Dark

Feature

3mm diameter, 1kg net weight, ABS Filament
Filament Roundness: +/- 0.07mm
Filament Diameter: +/- 0.05mm
Recommended Print Temperature: 230 - 240C, depending on printer model
Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

6. HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm - Glow in The Dark - Blue

Feature

1 KG (approximately 2.20 lbs) Spool
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Glow in the Dark PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
Recommended Extrusion/Nozzle Temperature 180C - 210C (356F - 410F)
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.25"

7. Geeetech 3D Printer Filament,Luminous PLA Filament 1.75mm,Glow in The Dark Blue 1kg (2.2lbs) 1 Spool

Feature

Glow in the DarkThis filament contains phosphorescent materials that glows in the dark after absorbing light energy.Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament.
High CompatibilityThis filament are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm.
High QualityThis filament Anti-warping, high accuracy, no bubble, no jamming and no drawing.Recommended printing temp 190-230C (374-446F), hot bed temp 50-70C (122-158).
Vacuum Sealed PackageGEEETECH 3d filament is carefully vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams.
100% Satisfaction WarrantyGEEETECH provides 100% Satisfaction Guarantee and Premium Customer Services within 24 hours guaranteed reply. If you are not satisfied with this filament, please kindly contact us at ANY TIME.

8. Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) Fits Most FDM/FFF Printers Odor Free, Clog Free Filaments - Glow in The Dark

Feature

PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215C - 230C (419F - 446F) Recommended Bed Temperature: 60C -80C (140F - 176F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA is the most cost-effective way to bring your creations to life. *Please Note* You may receive either the plastic spool or cardboard spool for a short duration.

9. HELLO3D Glow in The Dark Luminous Blue PLA 3D Printing Filament, 1.75mm, 1kg Spool(2.2lbs)

Feature

Compatible with most of FDM 3D Printers, PLA filament 1.75mm consistent diameter, dimensional accuracy +/- 0.05mm, Length 994ft
Our PLA Filament contains phosphorescent materials that glow in the dark after absorbing light. Brighter light or more UV will charge the material better for a brighter glow
Recommend Light sources: LEDs, fluorescent bulbs, CFLs, incandescent bulbs, especially sunlight and UV, Sunlight works the best; the color of the products will be affected by light time and will be gradually darken over time
Smooth Printing - Orderly warping, fixed hole, no tangle. Melt well, great bed adhesion, no bubble, no jamming; Recommended Extrusion/Nozzle Temperature 190C - 220C
Vacuum sealed pakage to avoid direct sunlight, plus a zipper lock to better preserve the HELLO 3D filament

10. ZIRO PLA Glow Filament 1.75mm,3D Printer Filament PLA PRO 1.75mm Glow in The Dark Color 1KG(2.2lbs),Dimensional Accuracy +/- 0.03mm,GID Blue

Feature

ImportantIt's recommended to expose it to short-wave visible light (<450nm), bright sunlight, or ultraviolet (UV) light for around 30 minutes.
Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament
Recommended Extrusion/Nozzle Temperature 190-220, Heat bed 50-60, Print Speed 30-90mm/s
Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard
After-sales service: Find us from the card, any question will be provided with a satisfactory solution

Conclusion

By our suggestions above, we hope that you can found the best pla filament 1.75mm glow in dark blue for you. Please don't forget to share your experience by comment in this post. Thank you!