Reviews Living

What are the best rf receiver 315mhz currently available to purchase? This article attempts to give you some answers to guide you in the process of purchasing the best rf receiver 315mhz to suit your needs. In our buying guide, we outline certain features to consider when buying rf receiver 315mhz. It is important to take time and research before you commit to purchasing.

Related posts:

Best rf receiver 315mhz reviews

1. HiLetgo 315Mhz RF Transmitter and Receiver Module link kit for Arduino/ARM/MCU/Raspberry pi

2. Seco-Larm SK-910RBQ Wireless Single-Channel RF Receiver, 11~24 VAC/VDC, 315MHz, Relay Output, Compatible with All ENFORCER 315MHz Transmitters, Up to 500' (150m) Range, 5 Output Modes

Feature

Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
LED indicates RF reception, learn mode entered, transmitter learned, memory cleared
This revolutionary receiver incorporates: Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals. HIGHER SENSITIVITY for greater operating distances. UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted. GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration
Mode switch for easy transmitter learning, Learns up to 15 transmitters, Screw terminals for simple connection
5 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Validity: receiver outputs for as long as the transmitter button is pressed, Latch

3. DAOKI 5PCS 315Mhz RF Transmitter and Receiver Link kit for Arduino/ARM/MCU/Raspberry pi Wireless

Feature

TX Working voltage: 3V-12V. Working current: 20-28mA.
Resonance mode: sound wave resonance (SAW)
Modulation mode: ASK /OOK
RX Working voltage: 5.0VDC. Static current:4MA
Working principle: single chip superregeneration receiving

4. RF Development Tools RF M4 Receiver Momentary Type (1 piece)

5. Simple RF L4 Receiver - 315MHz Latching Type

6. Oiyagai 3pcs 315MHz RF Wireless Transmitter and Receiver Module Kit for Arduino/Arm/McU/Raspberry pi

Feature

TX Working voltage: 3V-12V. Working current: 20-28mA.
Resonance mode: sound wave resonance (SAW)
Modulation mode: ASK /OOK
RX Working voltage: 5.0VDC. Static current:4MA
Package included: 3 x 315 mhz RF transmitter + 3 x 315 mhz RF receiver

7. Adafruit (1095 Keyfob 4 Button RF Remote Control - 315MHz

Feature

Weight: 21.22g
Uses two CR2016 coin cells
A matching RF receiver is not included
This 4-button keyfob remote goes with our three basic 315MHz RF receiver modules.

8. Seco-Larm SK-919T1-GBQ 315MHz Pendant RF Transmitter with 1 Buttons and 1 Channels, Compatible with all 315MHz SECO-LARM Receivers, Operates Up to 500ft, Over 68 Billion Possible Codes

Feature

1-BTN FMLY TRNSMTR,315MHZ,ENF

9. Gazechimp RF Module 315MHz Superheterodyne Receiver for

Feature

Operating frequency: 315MHz, bandwidth of about 150KHz;
Low power consumption;good selectivity and spurious radiation suppression
Support ASK / OOK modulation, the receiver sensitivity of -107dBm;
mains input voltage range: 3.0V-5V;Working current: Type :5.0mA (Requirement:VDD=5V) ; Type :6.0mA (Requirement:VDD=3V)
Good local oscillator radiation suppression, multiple receiver module to work with (ie, more than single income) and will not interfere with each other, used together without affecting the receiving distance;

10. Abovehill 12V Wireless RF Remote Control Relay Switch Universal 2-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More

Feature

Remote control switch can be remotely controlled from a long distance, and has strong anti-interference ability. The remote control distance of the open space is 30 meters. In the case of interference or wall blockage, the control distance will be reduced. The specific situation is determined according to the scene.
Wireless remote control module, working voltage is 12V DC, working frequency is 315mhz. It can directly drive DC/AC loads, and the relay can withstand a current of 10A. The remote control uses 12V 23A dry batteries.
Remote control buttons A and B control the two relays of the receiver. They work independently and do not interfere with each other. When the control buttons A and B are pressed, the indicator on the receiving board will light accordingly. It also has learning and deletion functions. The operation is very simple and has detailed instructions in the product description.
Remote control buttons A and B control the two relays of the receiver. They work independently and do not interfere with each other. When the control buttons A and B are pressed, the indicator on the receiving board will light accordingly. It also has learning and deletion functions. The operation is very simple and has detailed instructions in the product description.
12V Wireless remote control module is widely used in life, such as windows, entrances, garage doors, alarm systems, lifting equipment, etc. Note: If you encounter any problems, please send us an email and we will help you here. Thank you.

Conclusion

All above are our suggestions for rf receiver 315mhz. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using rf receiver 315mhz with us by comment in this post. Thank you!