Reviews Living

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 scroll saw delta. Its followed by an in-depth review of each scroll saw delta. Hopefully, once you are done reading this article, you will be well informed about scroll saw delta and be able to select the right scroll saw delta for you without any hesitations.

Related posts:

Best scroll saw delta reviews

1. WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

Feature

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
Variable speed goes from 400 to 1600 strokes per minute
Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

2. DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788)

Feature

Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
Arm lifts so blade can be easily threaded through the material for inside cuts

3. Excalibur - EX-21 21" Tilting Head Scroll Saw with Foot switch

Feature

UNIQUE TILTING HEAD - Tilt the head 38 left or 45 right to keep the workpiece level, allowing for better control and more precise cuts.
INTEGRATED BLADE GUARD - Upper and lower blade guard assembly helps prevent accidental hand contact with the blade. While, the switch protection device prevents unintentional start-up.
ADJUSTABLE BLADE MOUNTING - Easily raise or lower the mounting position of the blade to make just the right cut.
SEAMLESS BLADE CHANGES - Finger-operated blade clamps make changing the blades quick & easy. No tool required.
LARGE TABLE SURFACE - The spacious work surface allows you to cut any material you need!

4. Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw

Feature

Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0 - 45 left and right. Motor: 1.3 Amp
On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades

5. 18" Variable Speed Scroll Saw with Stand

Feature

Large aluminum 20" x 12 5/8" dual tilting table allows for bevel cutting up to 45 degrees
Patented table top bevel scale for accurate and convenient readings
Tool-less blade holder makes quick and easy 5" pin or plain end blade changes
Built-in adjustable LED work lamp for better illumination of work area
Variable speeds between 500 and 1500 SFM with upfront control knob

6. Delta Power Equipment Corporation 40-696 Scroll Saw Stand, Black

Feature

Adjustable rear leg allows saw to be tilted downward in front for easier use
Sturdy formed steel construction that when mounted to saw becomes a steady floor mount unit
Holes for mounting stand to floor
Includes complete assembly instructions

7. General International 16" Scroll Saw - 1.2A Variable Speed Woodworking Saw with LED Light & Flexible Shaft - BT8007

Feature

PRECISION CUTTING - Up-front dial allows setting the exact cutting speed choice for processing different materials, Cast aluminum work table tilts 0 to 45 left with up-front locking knob and bevel scale
INNOVATIVE DESIGN - "First to market" and design Flex-neck LED work light, Patented blade holder accepts both standard 5 in. pin-end or plain-end (pinless) scroll saw blades, Side storage compartment on the housing for spare blades and wrenches
KEEP THE JOBSITE CLEAN & SAFE - Saw dust collection port for standard 1-1/4 in. hose, Saw dust blower keeps the cut line clear. Safety on/off switch wth removable security key: 2 pinned blades, 3mm blade change T-style hex key, 4 mm adjustment hex key
HIGH-POWERED CUTTING - 144 Watt, 120V~60Hz, Amp: 1.2, No-load Variable Speed: 400-1600rpm, Easy access motor brushes
CUTTING FEATURES - Max. cutting capacity (throat depth): 16 in., Max. cutting thickness: >2 in. at 90, Stroke Length: 5/8 in.

8. WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw

Feature

2.5 amp motor rotates the blade up to 2500 feet per minute
Create cuts up to 3-1/2 inches deep and 9 inches wide
Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty

9. 16 Inch Scroll Saw with Flexible Shaft Attachment

Feature

Designed for the hobbyist with limited shop space
full function scroll saw with a flexible shaft attachment compatible with hundreds of Dremel-type accessories.

10. BUCKTOOL 16-inch Variable Speed Scroll Saw Pin or Pinless Blade with Pedal Switch Cast Iron Work Table

Feature

Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth Performance
LED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth

Conclusion

All above are our suggestions for scroll saw delta. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using scroll saw delta with us by comment in this post. Thank you!