Reviews Living

What are the best thermal epoxy glue currently available to purchase? This article attempts to give you some answers to guide you in the process of purchasing the best thermal epoxy glue to suit your needs. In our buying guide, we outline certain features to consider when buying thermal epoxy glue. It is important to take time and research before you commit to purchasing.

Related posts:

Best thermal epoxy glue reviews

1. PC Products 167779 PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 1 lb in Two Cans, Charcoal Gray

Feature

Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
Fills holes, castings, and molds
Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.

2. Gorilla Clear Glue, 3.75 Ounce Bottle, Clear (Pack of 1)

Feature

Crystal clear
Non-foaming
Water resistant
Incredibly strong
Easy to use

3. MG Chemicals 8331 Silver Epoxy Adhesive - High Conductivity, 10 min Working time, 14 g, 2 Dispeners

Feature

Electrical resistivity: 0.007 cm, Thermal conductivity: 1.4 W/(mK). Heat cure is recommended to get the best possible conductivity
Continuous service temperature range from -55 to 150C (-67 to +302F)
Provides work time of 10 minutes and has full cure time of 5 hours (at 77 degrees F)
Two-part silver-filled epoxy adhesive with good conductivity and faster working time than MG Chemicals 8331S adhesive to bond electronic devices, form conductivity seals, and cold solder heat-sensitive materials
Easy 1:1 mix ratio. Stores and ships at room temperature, no freezing or dry ice required

4. MG Chemicals Thermally Conductive Epoxy Encapsulating and Potting Compound, 15 oz Kit, Black

Feature

Excellent electrical and thermal conductivity
Easy 1:1 mix ratio
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
Suitable for large production runs
Excellent machining properties

5. MG Chemicals 8329TCS Thermal Conductive Adhesive, Slow Cure, 15 g, 2 Dispeners, 8329TCS-6ML, 6 mL Kit,Dark Grey

Feature

Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
Excellent 1. 44 W/(make) thermal conductivity
1-to-1 mix ratio and 4 hours pot life
Stores and ships at slightly below room temperature no freezing or dry ice required. Very long shelf life of at least three years even when stored at room temperature
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

6. MG Chemicals - 8329TCM-6ML 8329TCM Thermally Conductive Adhesive, Medium Cure, 14 g, 2 Dispensers, 6 mL Kit,

Feature

Thermal conductivity: 1.36 W/(mK)
Easy 1:1 mix ratio
Adheres to most electronic substrates
Stores and ships at slightly below room temperature - no freezing or dry ice required. Very long shelf life of at least two years - even when stored at room temperature
Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

7. GENNEL G109 10gram Thermal Conductive Glue , Thermal Plaster, Silicone Viscous Adhesive Compound, Heatsink Glue for LED GPU MOSFET Printer Chipset IC High Performance

Feature

Suitable for all heatsink without fixed clip. It has heat conducting properties, strong adhesion. Helps disperse the heat from Chipset to heatsink effectively.
Use for MOSFET, LED, heat sinks , North-south bridge, video card, Chipset, heat dissipation part, heat dissipation, electrical appliances, instruments and other industries.
It has good thermal conductivity and wide service temperature range(-60~250 degrees Celsius)
Thermal conductivity:> 1.2W/m-K, Do not use thermal glue "between CPU and HEATSINK"!
Package Includes : 1 x GENNEL G109 10g thermal glue

8. MG Chemicals High Thermal Conductivity Epoxy, Flame Retardant, Black, 900 mL Kit

Feature

Certified UL 746A (File# E334302)
Thermal conductivity of 0. 94 w/(my)
Low exothermic
Broad service temperature range -50 to 150 c (-58 to 302 f)
Low shrinkage and high dimensional stability

9. MG Chemicals - 8329TFF-25ML 8329TFF Thermally Conductive Adhesive - Fast Cure Epoxy, 25 mL Dual Dispenser

Feature

Thermal conductivity of 0. 8 W/(mK)
1: 1 mix ratio
Working life: 4 minutes, set time: 15 minutes
Cure time: 3 hours at room temperature or 15 minutes at 65 c (149 f)
Flame retardantmeets ulu 94v-0 standard

10. Halnziye 10Gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound for LED GPU Chipset Heatsink

Feature

Do Not Use Thermal Glue Between CPU Chip And Heat Sink, use it within 24 hours once opened.
Thermal conductivity:> 1.2W/m-K
Strength of connected buildings: 55 lb.
Features: thermal properties, strong adhesion
Application: apply to all heatsink no fixed clip thermal paste. Ideal for MOSFET Heatsink VGA CARD Northbridge Southbridge Heatsink.

Conclusion

All above are our suggestions for thermal epoxy glue. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using thermal epoxy glue with us by comment in this post. Thank you!