Reviews Living

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 umbrella mount with adjustable shoe. Its followed by an in-depth review of each umbrella mount with adjustable shoe. Hopefully, once you are done reading this article, you will be well informed about umbrella mount with adjustable shoe and be able to select the right umbrella mount with adjustable shoe for you without any hesitations.

Related posts:

Best umbrella mount with adjustable shoe reviews

1. Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

Feature

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder.
Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe.
A hole with locking screw in middle specially designed for holding umbrella.
Easy Adjustment. This Flash bracket is with 180 vertical and 360 horizontal adjustment to allow to position the umbrella and flash in different angle.
Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system.

2. SUPON 3-Section U-Shape Camera Flash Swivel Mount Bracket for Umbrella Softbox Reflector Holder Stand Compatible for Nikon Canon Pentax Olympus and All Other Speedlites Studio Light

Feature

This U-shape Bracket holder has two reserved interface at the top and bottom, and the interface is designed with mandrel hole which can be installed horizontally or vertically to such light stands and adapter screws of the diameter less than 15mm;
Supports umbrellas of shaft diameter less than 10mm, with independent locking screw;
Using large handle of 70mm, clamp-type locking design, with the advantage of energy saving and large bearing capacity.
Insert your flash unit(speedlite, trigger), ball head and umbrella,then adjust your mount, so it is at an optimum angle for getting great photographic results time after time.
Two rotating section to allow 180 degree maximum flexibility in setup;

3. Camera Flash Speedlite Mount Flash Stand Umbrella Holder Shoe Mount Swive Light Stand Flash Bracket Flash Adapter Compatible for Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes E Type

Feature

CAMERA FLASH SPPEDLITE MOUNT- It can be applied to various flash,Such as Canon, Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash) you could mount a hot shoe flash slave sensor receiver you may also adjust the umbrella and flash in different angle suitable for all Hot-Shoe flash, trigger transmitter or slave.
180 Degree SWIVEL JOINT- lamp holder in reflective umbrella or soft light umbrella socket, and can adjust the flash back office degrees, 180 degrees of the was made better use of flash lighting and lighting.
1/4" SOCKET AND 3/8" METAL HOTSHOE- 1/4" socket and 3/8" metal hotshoe foot on the bottom, for attachment to other photograhic accessories.
CAMERA UMBRELLA HOLDER-There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.There is a hole in the middle of this item so that you can insert a lighting umbrella and align it with the flash
HIGH QUALITY ALUMINUM ALLOY- The camera umbrella holder is made of aluminum alloy,durable and solid.

4. Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes, Studio Light, LED Light(2 Pack)

Feature

Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder
Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does not fit Sony and Minolta flash)
A hole specially designs for holding umbrellas,180 vertical and 360 horizontal adjustment
Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand
Note: Light stand, speedlite flash and umbrella are not included

5. Light Stand/Flash Shoe Bracket Mounts with Multi Functional Umbrella Reflector Insert Hole Holder, Light Stand Mount, 1/4" Screw Stud, 1/4" 3/8" Female Screw Adapter Thread Brass Photography Studio

Feature

Contents: [1 x] Flash Shoe Bracket, [1 x] 1/4", 3/8" Female Thread, [1 x] 1/4" Male Thread
Black Metal, Hard Plastic Material, 5-inch Height
Two Mounting Stud on Top/Bottom
Light Stand Tripod Mounting, Angle Adjustable, Tightening Lever
Umbrella Reflector Insertion Hole

6. Camera Flash Speedlite Mount, ChromLives Professional Swivel Light Stand Light Bracket Umbrella Bracket Mount Shoe Holder E Type for Canon Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes

Feature

Light Stand Bracket, Cold Shoe Mount with Umbrella Holder.
Cold Shoe Flash Bracket- Universal cold shoe mount on top for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash)
Umbrella Mount Bracket- A hole design for mounting urbrella. 180 Swivel joint allow vertical adjustment of the umbrella and flash light.
Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand.
Material: Solid Metal body,abs knob.

7. FOTYRIG Camera Flash Speedlite Stand Flash Stand Bracket Umbrella Mount Holder Shoe Mount for Camera Canon Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes E Type-2 Pack

Feature

CAMERA FLASH SPEEDLITE MOUNTIt can be applied to various flash,Such as Canon, Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash)
FLEXIBLE POSITIONINGThese flash mounts allow 180 vertical and 360 horizontal adjustment to position the umbrella and flash light in different angle
1/4" SOCKET AND 3/8" METAL HOTSHOE1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread
CAMERA UMBRELLA HOLDERThere is a hole in this item so that you can insert a lighting umbrella and align it with the flash
STURDAY AND STABLE The camera umbrella bracket is made of aluminum alloy,durable and solid.

8. Camera Speedlight Mount Flash Stand Speedlite Umbrella Holder Light Stand Adapter w/Shoe Mount for Camera Nikon Canon Pentax Olympus DSLR Flash Speedlite LED Light E Type-2 Packs

Feature

CAMERA FLASH SPEEDLITE MOUNT- It can be applied to various flash,Such as Canon, Nikon, Pentax, Olympus, Yongnuo and many more speedlites. (Note:this adapter does not fit Sony and Minolta flash)
180 DEGREE VERTICAL AND 360 DEGREE HORIZONTAL SWIVEL- These flash mounts allow 180 vertical and 360horizontal adjustment to position the umbrella and flash in different angle
1/4" AND 3/8" ADAPTERS- 1/4" socket and 3/8" metal hotshoe foot on the bottom for a variety of stand/tripod connections such as umbrellas and soft box lights,speed lights LED lights, monitor or recorder, Vive (VR system) Base Stations, umbrella lighting and flash units
CAMERA UMBERLLA HOLDER- There is a hole with locking screw so that you can insert a lighting umbrella and align it with the flash
STABLE AND STURDY- The camera speedite mount is made of aluminum alloy,durable and solid

9. Impact Deluxe Umbrella Mount with Adjustable Shoe -

Feature

180 DEGREE TILT and 360 DEGREE SWIVEL - Impact light stand bracket can tilt 180 degrees and swivel 360 degrees, allowing you to aim your flash or light in any direction. This deluxe light stand mount also includes two removable, reversible 3/8"-16 and 1/4"-20 brass stud adapters to support various accessories
SPACE SAVING MOUNTING OPTIONS - Useful and versatile addition to any photography umbrella lighting kit; this umbrella and flash bracket mount features a 5/8 holes that allow you to mount it vertically or horizontally for maximum versatility and so you can use your light in tight spaces.
HEAVY DUTY and STURDY; MADE OF PREMIUM ALUMINUM ALLOY - This sturdy camera flash bracket is durable and can take a lot of beating, making it a versatile photography must-have. It adds functionality to any camera light stand, tripod or boom arm.
MULTIPLE ADJUSTMENTS and SUITABILITY - Impact speedlight mount is a good alternative for mounting small light fixtures. It can be installed on any industry-standard light stand with a 5/8" top stud from either end of the mount. Its suitable for most speedlites and flashes with standard cold shoe mount.
SATISFACTION GUARANTEED; 1-YEAR WARRANTY - Unlike many flimsy, all-plastic competitors, our umbrella and flash holder is long-lasting and super durable. Its an ideal accessory for shooting on the run and for any kind of photography. We are confident of its quality that we back it up with a 1-year limited warranty.

10. Updated Version Flash Bracket-ChromLives Light Stand Flash Mount Cold Shoe Flash Stand Photography Camera Umbrella Holder Bracket E Type for DSLR Camera Canon Nikon Pentax Olympus Nissin Metz and DSLR

Feature

Updated Version Flash Bracket- Swivel Light Stand Bracket, Standard Flash Cold Shoe Mount with Photography Umbrella Holder. Updated Parts: Cold Shoe, Metal Locking Wheel.
Cold Shoe Bracket- Updated shoe mount on top to catch your flash speedlite without falling off! Universal cold shoe mount for most DSLR Camera flashes speedlite light Nikon Canon Panasonic Yongnuo Neewer Godox flashes and more. It also works on monitor,ring light, video LED light, studio light,and other flashes rigs that come with a camera shoe type.
Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, which can be converted by yourself, allow the light stand bracket to attach to a tripod or light stand. Note:You will received the flash bracket with the convert screw. Release the screw to get 1/4 thread or 3/8 thread.
Umbrella Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella. 180 Swivel joint allow vertical adjustment of the umbrella and flash light.
Metal Locking Wheel - We updated the material of the locking wheel from plastic to now metal, to better support the cold shoe mount on top without breaking. Material: The flash bracket is made of whole aluminum alloy,durable and solid to use. Package includes 2pack of Chromlives flash bracket mounts.

Conclusion

By our suggestions above, we hope that you can found the best umbrella mount with adjustable shoe for you. Please don't forget to share your experience by comment in this post. Thank you!