Reviews Living

If you looking for vklsvan then you are right place. We are searching for the best vklsvan on the market and analyze these products to provide you the best choice.

Related posts:

Best vklsvan reviews

1. VKLSVAN ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Module for Arduino IDE

Feature

Compatible with Arduinoworks great with the latest Arduino IDE/Mongoose IoT/Micropython
Support Lua program easy to develop.
Support three modesAP, STA and AP + STA.
Dual CoreDual coreESP-32 Antenna Module

2. VKLSVAN 2PCS ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board, Open Source Serial Wireless Module for Arduino IDE/Micropython

Feature

The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation.
The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking.
Built-in Micro-USB, with flash and reset switches, easy to program
Full I/O port and Wireless 802.11 supported, direct download no need to reset
Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython

3. VKLSVAN G28U7FTTL GMOUSE GPS Module Ceramic Antenna TTL Level for Vehicle Monitoring Navigation,Replace VK16E

Feature

Baud rate4800,9600,19200,38400,57600,112500bps (default baud rate is 9600)
Compatible with ArduinoIt can work well with arduino.
Chip this G28U7FTTL can Replace VK16E.
Application It can be used in vehicle monitoring, bus station, car guide Navigation, ship navigation, notebook navigation and other products
Document linkplease contact us,we will send it to you.

4. VKLSVAN 10PCS MT3608 Step Up Boost Converter DC-DC 2V-24V to 5V-28V Adjustable Step Up Voltage Regulator Module 5V 9V 12V 24V

Feature

Input Voltage: DC 2V-24V; Output Voltage: DC 5V-28V; Maximum Output Current: 2A
Efficiency: Max 93%
Product Size: 36 x 17 x 14 mm/1.44 x 0.68 x 0.56 in(L*W*H)
With this mini step-up converter, you can easily DIY an output adjustable power supply, like 9V, 12V, 15V, 18V, 24V etc.
Note: If the output voltage cannot be adjusted and always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns firstly.

5. VKLSVAN 5PCS RC522 RFID RF IC Reader Card Sensor Module with S50 White Card and Key Ring for Arduino Raspberry Pi

Feature

Power Voltage : 3.3V,Operating frequency: 13.56MHz.
Current :13-26mA / DC 3.3V,Idle Current :10-13mA / DC 3.3V
This module can be directly loaded into the various reader molds.
Applicable for the users who need to design or manufacture the RF card terminal.The development of access controls, electronic door locks or terminals for the time recording.
It is supported card types: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.

6. VKLSVAN 10PCS Micro SD Card Module Mini TF Read Write Card SDHC SPI Interface Driver Board for Arduino

Feature

Through the file system and SPI interface driver, the MCU system can completethe reading and writing of files in the MicroSD card.
Support Micro SD Card, Micro SDHC card (high speed card).
On-board level shifting circuit, interface level can be 5V or 3.3V. Power supply is 4.5V~5.5V, onboard 3.3V regulator circuit. Communication interface is standard SPI interface.
The module has 4 M2 screw holes with a hole diameter of 2.2mm for easy install positioning, to achieve inter-module combination
You can install / remove the memory card by pressing it lightly.

7. VKLSVAN 2PCS CP2102 Serial Module USB to TTL Converter Adapter UART Downloader 3.3V/5V with Jumper Wires

Feature

Stable and reliable chipset CP2102.
Baud Rate: Supporting 300bps ~ 1Mbps
Standard USB type A male and TTL 5pin connector. 5pins for 3.3V, RST, TXD, RXD, GND & 5V
Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40
Module has status indicator light, sending and receiving indicator lights. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness.

8. VKLSVAN 20PCS Micro USB to DIP 5-Pin Pinboard 2.54mm Power Adapter Board 5V Breakout Converter Module for DIY USB Power Supply Breadboard Design

Feature

Brand new and high quality Micro USB Power Adapter Module
Base Material: FR4; Interface: Micro USB; Voltage: 5V.
Size: Approx. 15 x 13 x 4mm/0.59 x 0.51 x 0.16 inch, Board Thickness: 1.6mm/0.63inch,Breakout Signals Pin Spacing : 2.54mm/0.1 inch
Widely application, great for DIY USB power supply, breadboard design, etc.. Widely used in pairing with a controller with USB support, or adding USB power to a project.
Package Content: 20 x Micro USB to DIP Adapter Board + 20 x 5-pin Pin Header.

9. VKLSVAN 2PCS Time of Flight(TOF) Ranging Measurements Sensor Breakout 940nm Laser Fast Accurate Distance Ranging Module I2C IIC

Feature

Name: Fully integrated miniature VL53L0X Laser ranging sensor module
Power supply: 2.8-5V
Easy integration:Single reflowable component,No additional optics,Single power supply,I2C interface for device control and data transfer,Reset and interrupt GPIO, Programmable I2C address
Fast, accurate distance ranging: Measures absolute range up to 2m, Reported range is independent of the target reflectance,Operates in high infrared ambient light levels, Advanced embedded optical cross-talk compensation to simplify cover glass selection,opening the door to various new applications.
Widely Applications1.User detection for Personal Computers/ Laptops/Tablets and IoT (Energy saving); 2. Robotics (obstacle detection); 3. White goods (hand detection in automatic faucets, soap dispensers etc...); 4. Laser assisted Auto-Focus. Enhances and speeds-up camera AF system performance, especially in difficult scenes (low light levels, low contrast) or fast moving video mode.

10. VKLSVAN 10PCS B10K Replacement Trimmer Potentiometer Sensor for PS3 PS4 Switch Controllers Green Rocker Repair Parts for Thumb Stick Analog Joystick

Feature

Required Ability:This repair parts needs to be welded by yourself, which requires you to have basic welding tools and a certain welding ability, but it is not complicated.
How to use:1. Take out the board separately and pry the side potentiometer of the rocker; 2. Take out the copper core of the original potentiometer and replace it with a new one (pay attention to the direction of the copper sheet).
Applicability: Potentiometer sensor module for game controller joystick (For XBOXONE, For PS4, For Switch Pro).
Usage Tips: The general rocker offset only needs to replace the copper core in the potentiometer. In serious cases, please replace the entire joystick.

Conclusion

By our suggestions above, we hope that you can found the best vklsvan for you. Please don't forget to share your experience by comment in this post. Thank you!