There are many reasons you might choose to buy vna analyzer ham but it is not easy to find the best suitable vna analyzer ham for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best vna analyzer ham.
Rank
Product Name
Score
Related posts:
Best vna analyzer ham reviews
1. Antenna Analyzer Meter 1-60MHz Shortwave SWR Antenna Analyzer with 1.0 to 9.99 SWR Usable Measurement Range for Ham Radio
Feature
HIGH QUALITY-- This Antenna Analyzer adopts black case would protect the antenna analyzer from external damage, durable in use.CONVENIENT OPERATION-- 5 operation buttons are easy and convenient to operate. You can selects operation mode, band and extended functions.
FEATURE-- The antenna tester is Powered by DC 12 to 14V 500mA external power with 2.1mm power jack(center pin positive), just connect the power and then work. The meter has compact size, easy to carry and store in your bag.
WIDE MEASUREMENT RANGE-- SWR usable measurement range of this analyzer is 1.0 to 9.99. step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz.
APPLICATION-- Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. It can measure feed-point impedance, ground loss, inductors and capacitors. Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance. Coaxial Cable Loss, Determine antenna tuner loss, Estimate quartz crystal parameters.
2. AURSINC Vector Network Analyzer 10KHz -1.5GHz V3.4 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
Feature
This is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD display, portable with battery powered or USB poweredThe improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
The metal shield is designed to reduce the external interference and improve the measurement accuracy
Package include NanoVNA host (with battery) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
3. Hima for Nanovna Vector Network Analyzer HF VHF UHF UV VNA Antenna Analyzer 50Khz-900Mhz+2.8''LCD + Battery, Measuring S-Parameter Voltage Standing Wave Ratio, Phase, delay, Smith Chart
Feature
1.Practical DIY Product: This is a practical DIY product that provides perfect vector network measurement capabilities, lightweight and portable and portable, stand-alone, 2.8-inch LCD display, portable battery or USB powered, and can be used offline for 2 hours.2.Multiple Functions: You can export Touchstone (snp) files from PC software for a variety of radio design and simulation software. The function is used for antenna performance measurement.
3.Better Dynamics: The si5351 direct output in the 50k-300MHz frequency range provides better than 70dB of dynamics, the extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics
4.Wide Range Frequency: The improved frequency algorithm can use the odd harmonic extension of the si5351 to support measurement frequencies up to 900MHz. The TX / RX method measures the complete S11 and S21 parameters. If you need to get S12 and S22, you need to manually replace the transceiver port wiring.
5.Package Includes: NanoVNA host (with battery) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1.
4. Vector Network Analyzer, Elikliv Mini HF VHF UHF Antenna Analyzer with 10KHz-1.5GHz 2.8 Inch Digital LCD Display Touching Screen Standing Wave Measuring Instrument
Feature
Perfect DIY Product (Ver 3.4) : the Vector Network Analyzer provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD display, portable with battery powered or USB powered(battery Not included )Improved Frequency Algorithm : the Antenna Analyzer can use the odd harmonic extension of the si5351 to support measurement frequencies up to 900MHz. The TX / RX method measures the complete S11 and S21 parameters. If you need to get S12 and S22, you need to manually replace the transceiver port wiring.
Metal Shield Designed: the HF VHF UHF UV VNA Antenna Analyzer with metal shield design which reduce the external interference and improve the measurement accuracy.
10KHz-1.5GHz Frequency Algorithm : The si5351 direct output in the 50k-300MHz frequency range provides better than 70dB of dynamics, the extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
Small and Portable, Easy to Use: Unit is designed to Original Equipment (OE) fit, form and function Simple and practical PC control software, we can export Touchstone (snp) files for various radio design and simulation software through PC software.
5. SEESII 10KHz-1500MHz Vector Network Analyzer Kit MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8inch Touch Screen
Feature
Unit is designed to fit for Original Equipment, form and function Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software.The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
Requirements accomplished by leveraging Spectra Premium's OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change.Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.
This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
6. UpgradedAURSINC Vector Network Analyzer 10KHz -1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart(Latest Version REV3.4)
Feature
UPGRADED: Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Added a case, which is protective and dust-proof.IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
MULTIPLE FUNCTIONS: The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
STRONG AND SECURE POWER SUPPLY: This VNA is battery powered or USB powered; Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
Package include NanoVNA host (with battery) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
7. Seesii Vector Network Analyzer,REV3.4 10KHz-1.5GHz MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart,USB Charging
Feature
New Upgraded Version: Compared with old version NanoVNA, it save more costs with the addition of ABS casing and the new packaging. Hot stamping technology and plastic inner protection reduce the problems caused by transportation shocks and other processes. Support time domain analysis function (TDR).USB-C to USB-C: Support USB-C to USB-C line, more convenient to connect to mobile phones. Compatible with most Android phones with the same screen display (doesnt support for iPhone). Solve the problem of small screen, insufficient brightness and so on. Besides, the battery usage can be displayed on the interface.
Wide Range Frequency: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
Unit is designed to Original Equipment (OE) fit, form and function Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, please manually replace the transceiver port wiring. Other details have been improved.
Requirements accomplished by leveraging Spectra Premiums OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change. Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.
8. Seesii Vector Network Analyzer HF VHF UHF VNA Antenna Analyzer 50kHz-1000MHz 4.3''LCD Touching Screen,Measuring S-Parameter Voltage SWR, Phase, delay, Smith Chart
Feature
4.3 inch Large Touch screen and powerful functionHandheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mAh / 3.7V lithium battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
Measurement Range The NanoVNA-F measurement range is 50k-1GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
Compact and Powerful: Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching.
9. Upgraded Vector Network Analyzer 10KHz -1.5GHz HF VHF UHF Antenna Analyzer,2.8 inch Touch Scree,Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
Feature
NEW UPGRADED VERSION: This Vector Network Analyzer added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Moreover, added a shell case, which is protective and dust-proof.IMPROVED HIGH ACCURACY: HF VHF UHF Antenna Analyzer Measuring added a shell case, which is protective and dust-proof.The metal shield is designed to reduce the external interference and improve the measurement accuracy
IMPROVED FREQUENCY ALGORITHM RANGE: Frequency range is 10KHz -1.5GHz .The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
MINI & PORTABLE:Upgraded NanoVNA that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD display, portable with battery powered or USB powered.Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
WHAT CAN YOU GET: Upgraded NanoVNA hostx1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
10. AURSINC Nanovna-H4 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4 Inch LCD 1950mAh 4.2 Version
Feature
This Nano VNA is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAhbattery powered or USB poweredThe improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
Using PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software
The metal shield is designed to reduce the external interference and improve the measurement accuracy
