When you looking for voltage tester for dummies, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable voltage tester for dummies is not an easy task. In this post, we show you how to find the right voltage tester for dummies along with our top-rated reviews. Please check out our suggestions to find the best voltage tester for dummies for you.
Rank
Product Name
Score
Related posts:
Best voltage tester for dummies reviews
1. AURSINC Nanovna-H4 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4 Inch LCD 1950mAh 4.2 Version
Feature
This Nano VNA is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAhbattery powered or USB poweredThe improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
Using PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software
The metal shield is designed to reduce the external interference and improve the measurement accuracy
2. Fluke 1AC II VoltAlert Non-Contact Voltage Tester
Feature
Voltbeat technology and continuous self-test - so you always know it is workingUpon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Range 90-volt to 1000-volt
20-volt to 90-volt AC control circuit model also available
3. Gardner Bender GTK-2 Safety Kit, GVD-3504 Non-Contact Voltage Tester and GFI-3501 GFI Tester, 2-Piece
Feature
Non-Contact Voltage Tester senses AC voltage from 50-600VNon-Contact Voltage Tester features visual and audible indicator, pocket clip, on-off button
GFCI Outlet Tester features indicating lamps that indicate 5 common wiring errors
GFCI Outlet Tester has comfortable contoured design
Two Piece Safety Kit
Superior quality at an affordable price
Gardner Bender branded products and professional equipment have been a mainstay with electrical contractors
Two Piece Safety Kit
Superior quality at an affordable price
Gardner Bender branded products and professional equipment have been a mainstay with electrical contractors
4. Gonine EP-5B EH-5 Plus AC Power Adapter DC Coupler Charger kit, Replac EN-EL15 Battery for Nikon 1 V1 D800 D810 D750 D7500 D7200 D7100 D7000 D610 D600 Digital Cameras.
Feature
Compatible With: Nikon Coolpix D500, D600, D610, D750, D7000, D7100, D7200, D800, D850, D800E, D810, D810A,1V1 Camera.We had done some technical upgrade for our EP-5B DC Coupler ( EN-EL15 dummy battery pack).
Input:100~240V AC, 1.5A 50~60Hz, Output: DC 9.0V/6A 54W.
This adapter kits DC Coupler can implement original EP-5B DC Couplers all functions.But our DC Coupler cant use alone,you need equip this kits AC/DC Adapter so that Works well with camera.
Kit includes an US AC cord to plug into the outlet ,a EP-5B dummy battery to plug into the camera, and an EH-5 AC/DC adapter to connect the AC wire and EP-5B dummy battery.
5. DZS Elec Mini USB 0.15A-3A Electronic Load Tester Module Adjustable Constant Current for 3.7V~13V 15W Continuous Discharge Intelligent Discharge Resistance Ageing Discharger Power Bank Tester
Feature
Rotate the knob of constant current potentiometer to adjust 0.15A-3A discharge current, clockwise rotation for increasing, anticlockwise rotation for decreasing.NTC thermistor can be controlled at 40, the cooling fan automatically start or stop. There will be little heat during use, please be careful to use and keep away from combustible items.
Reserved interface for fan start/stop. By default, fan starts or stops with the change of temperature. Connecting the middle bonding pad with ON pad, the fan will keep running, connecting the middle bonding pad with OFF pad, the fan will be closed.
USB port can be extracted individually for wide range of application.
Applied voltage range is 3.7V-13V, supporting 15W continuous discharge, working with indicator light.
6. KOLSOL PoE Checker Tester Inline PoE Voltage Current Tester with Cable tester NF-488
Feature
Inline PoE power testingTest the current, voltage and power consumed by DC appliances.Standard PoE testingTest the information of the standard PoE device, such as afat standard, power supply voltage, power supply polarity and mode.
Non-standard PoE testingIdentify the supply voltage, power supply polarity and mode of non-standard PoE devices.
Cable contintuityCheck the short circuit, crossover and open circuit status in the network cable.
Loopback testingThe loop-back test function of the switch,Compatible with 10M ,100M,1000M switch.
7. USB Load Tester, DROK Electronic Load Test Resistor Module 25W LD25 USB and Type C Interface Discharge Adjustable Constant Current 0.25A-4A Intelligent Temperature Control with Cooling Fan
Feature
What is it: it is a USB intelligent temperature control electronic load; with high power, high current, high voltage and intelligent control features.Easy Opeartion: set the load to resume normal operation manually or automatically after releasing the protection condition; can freely set the boot state to be on or off by default; 4-bit led digital display; check the load voltage value / current value / power value; intelligent temperature control cooling fan; Precision adjustable potentiometer; Over-voltage protection / overpower protection / over temperature protection.
Protection Function: OVP overvoltage protection (25V-30V overvoltage protection, digital display OVP, permanent damage after more than 30V); OPP over-power protection (load temperature is greater than 80 C, the device stops working, digital display OTP); OTP over-temperature protection (power greater than 25W, equipment stops working, digital display OPP).
Application: can provide 4A, 25V, 25W (3 values can not used over range) constant current test discharge task. The friendly human-computer interface and excellent performance indicators can meet the diverse testing needs. It is suitable for measuring the output current capability of the charger, using the bulk aging test of the charger factory, and measuring the quality of the Micro USB charging cable and the Type-C charging cable.
Note: the usb tester module has no reverse connection protection, the input polarity cannot be reversed, otherwise the product is permanently damaged and cannot be repaired.
8. USB 3.0 Power Meter Tester USB load Digital Multimeter Current Tester Voltage Detector DC 30.00V 4.000A Test Speed of Charger Cables QC 2.0/3.0 AP 2.4A (AT34+Load(FREE delivery))
Feature
Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance; Measuring voltage: 3.7V-30.00V; measuring current: 0-4.000A.The AT34 uses a 0.96-inch IPS high-definition color LCD display to display the state of charge of the appliance, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators at a glance. 160 degree wide viewing angle, high brightness and long working life. Fast charge recognition, widely compatible: AT34 supports QC2.0, QC3.0, i Phone 2.4A/2.1A/1A/0.5A, Andriod DCP, fast charge protocol identification, let you know the state of charge of the phone.
4-bit accuracy for more accurate measurements; Measure the load equivalent impedance and power; Thermometer function, Celsius and Fahrenheit free switching: Using high-precision thermistor sensor; USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
Package:1 X USB Meter, 1 X USB load ( 5V , 1A or 2A ) , 1 X Quick Tour. We offer User Manual PDF at the product detail page and could be downloaded if needed, 180-days Warranty.
Get Manual from forum.avhzy.com
9. USB Power Meter, Eversame 35W Adjustable Constant Current Electronic USB Load Tester Power Discharge Resistor With QC2.0/3.0 TriggerFor Testing Chargers And Cables/The Capacity of Power Bank
Feature
[A Combination Of USB Load and Multimeter]: Featured with OLED Screen Display, this Constant Current USB Load Tester supports 35W power continuously aging discharge testing. It enables you to monitor the value of the Current, Charging Voltage-Discharge, Resistance, Capacitance, Temp of the Boards and Time. While it can also calculate the capacity of the battery (tablets or smartphones) and power bank in mah (ma hour), in wh (w hour). One button achieves the data clearing and resetting.[2-Pot Current Adjustment]: This Electronic USB Load Tester endures the wide voltage range (DC3-21V) and current range (0-3A). The two knobs are for coarse-current (0-3A) and fine-current (+/-0.2A) adjustable trimming, which can be used for quick and accurate current controlling. The screw terminal is for external voltage measurement, allowing you to test batteries or other load sources. (Please make sure both 2 knobs of the multimeter are turned to counterclockwise fully before testing.)
[Comprehensive Pack]: Coupled with a QC2.0/QC3.0 trigger, this Multimeter can test QC2.0/QC3.0 fast charging voltage, loading a USB PD source at 5V/3A, 9V/2A, 12V/1.25A and 20V/1.5A for more accurate testing. (Note: The trigger can just work with the QC 2.0/3.0 Quick Chargers, instead of the ordinary chargers.)
[Versatile USB Electronic Load]: The various USB ports on the multimeter support most of USB Cables load testing, with the iphone5s/6s, Android micro-USB, mini USB or USB-C 3.0 interfaces. By this current size, you can measure the impedance of micro-USB cables and distinguish charge data cable quality is good or bad.
[Advanced Temperature Controlling System]: Using high-grade aluminum radiator with copper roll fan, to disperse the heat and prolong the life of the load. (The intelligent cooling fan will start working when temperature is higher than 55C, and automatically stops when temperature is under 45.) PACKAGE: 1X 1 x 35W electronic load + 1 x QC2.0/3.0 trigger. Every item includes 24-Month hassle-free warranty.
10. UCTRONICS Electronic USB Load Tester, Adjustable Discharge Resistor Module 35W, Test and Trigger QC2.0 QC3.0 AFC 9V FCP, Intelligent Temperature Control with Cooling Fan
Feature
Multifunction: Its not only electronic load, but also can test the QC2.0/QC3.0/AFC/FCP fast charge protocol, trigger output 5v/9v/12v/20vConnection ports: USB, Micro USB, Type C and external wiring port.
Rated operational voltage: DC 4.0-25.0V; Max discharging power: 35W; Rated operational current: 0.03-5.00A
Safe protection: anti-reverse protection, overvoltage protection (OVP), overcurrent protection (OCP), over-power protection (OPP), low-voltage protection (LVP), over-temperature protection (OTP).
Applications: electronic load; test charger, charging cable, powerbank and other device; equipment aging test.
