It’s hard to know which is good wire tracer toner. There are alot of wire tracer toner reviews on internet. In this article we suggest top 10 the best wire tracer toner for you. Please read carefully and choose what is the best wire tracer toner for you.
Rank
Product Name
Score
Related posts:
Best wire tracer toner reviews
1. Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking
Feature
Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester.
Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers.
Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.
Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
2. Wire Tracker Meterk RJ11 RJ45 Line Finder Handheld Cable Tester Multifunction Cable Check Wire Measuring Instrument for Network Maintenance Collation, Telephone Line Test, Continuity Checking
Feature
WIRE TRACING FUNCTION: Trace RJ11, RJ45, cables or other metal wire (via adapter). EASY & CONVENIENT TO OPERATE: Work perfectly when the RJ11 RJ45 cable is on power.STATUS OF TELEPHONE LINE TEST: Test the working status of the telephone line(idle, ringing, and off-hook) and judge TIP and RING line.
NETWORK CABLE COLLATION& CONTINUITY CHECKING: Judge short-circuits, breaking the circuit, open circuit, and crossing. Can check continuity in circuits.
LINE FUNCTION& PROFESSIONAL LINE FINDING: Easy and fast to locate the breakpoint without opening the wire's cover. Test line level, positive and negative polarity.
You Will Get: 1 x Emitter,1 x Receiver,1x Pair of Earphone ,1 x RJ11 Clip Adapter Cable,1 x RJ45 Cable,1 x Storage Bag,1 x User Manual (English + French + German + Italy + Spanish), Battery(Inside): Emitter: 1 x 6F22/9V Battery; Receiver: 1 x 6F22/9V Battery
3. Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit, IntelliTone Probe and Toner Kit,Multicolor
Feature
IntelliTone digital toning eliminates noise and false signalsSmartTone analog toning precisely isolates individual wire pairs
Locates cables safely and effectively on active networks
Verifies twisted pair installation with visual end to end continuity test
Probe detects digital signal and 1 kilo hertz signal from the analog toner
Probe has built in pair tester to identify open, shorted and crossed pairs
Signal strength indicator LEDs so you can help identify 1 cable that is bundled with other cables
Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in 1 step
4. Klein Tools VDV500-820 Cable Tracer with Probe Tone Pro Kit for Telephone, Internet, Video, Data and Communications Cables
Feature
Includes a professional grade tone generator and tracing probe for non-active wiringToner-Pro features 5 distinct tone cadences, transmits 1,000+ feet
Rugged Angled Bed of Nails (ABN) clips securely attach to wires
RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair
Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs
5. Extech TG20 Wire Tracer and Tone Generator
Feature
Identify wire pairs, check continuity & test telephone line polarity20 degree C to 550 degree C ( 4 degree f to 1022 degree f) in two ranges
Adjustable sensitivity control improves wire identification and eliminates false detection
Easily trace wires from source to termination
6. Sperry Instruments ET64220 Wire Tracker Wire Tracer, Audio / Video Installers Must-Have, for Coax, CAT 5, Speaker & Phone, Adapter plugs: RJ-45, RJ-11, Coax & More
Feature
Application: wire-tracer is a must-have Tester for audio/video Installer and data COM techniciansDesign: adaptor plugs include: RJ-45, RJ-11, Coax, automotive fuse blade and insulated Clamps
Design: adjustable sensitivity and positively identifies a single wire when multiple wires are routed in close proximity
Design: operates from (2) AAA batteries for the transmitter and (4) LR44 batteries for the receiver (included)
Features: audible and visual indication and an auto-shutoff after 45 minutes
7. Fluke Networks PRO3000F60-KIT Includes Tone Generator & Probe with 60Hz Filter and SmartTone Technology, 4962074
Feature
Innovative filter technology blocks interference "buzz" that makes tracing difficult, sends loud tone up to 10 miles (16 kilometers) on most cables, easy to hear through drywall, wood, and other enclosuresKit includes: Pro3000F filtered probe with 60Hz frequency filter and Pro3000 tone generator, angled bed-of-nails clips for individual pairs, RJ-11 connector for use on telephone jacks and nylon case which attaches to a belt, replacement tip for probe, requires 9V battery not included
SmartTone technology provides five distinct tones for exact pair identification so you can find cables faster on non-active networks
Tone and trace wire on non-active networks, filtered/unfiltered mode button with LED (green = filtered, red = unfiltered), 3.5 millimeter headphone jack and volume dial, replaceable tip
Loud probe speaker is audible in noisy locations, turns off automatically after 5 minutes to extend battery life
8. Proster Cable Tracker RJ11 RJ45 Wire Tracer Ethernet Tracker Telephone Tone Generator Line Toner Tester for Network Telephone Line Continuity Tester
Feature
Professional Wire TrackerCE Certificate, design to judge continuity of cables or wires, track the wires or cables and diagnose the break point within a group without damaging the insulation.Telephone Line CheckerIt can identify the state in the working telephone line, Clear, Ringing, Busy. (only the transmitter can be detected).
Network Cables VerifyingPlug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify the network cables working status.
TipsSend a single solid tone to the object cables or wires; Receive the tone signal on the cables or wires (telephone line).
ApplicationSuitable for not only Ethernet LAN, RJ45 internet cable, RJ11 telephone line, but also electrical and speaker wires when connecting to alligator clip.(NOTE: make sure the wires should be in power-off status).
9. BOOGIIO Wire Tester RJ45 RJ11 Cable Tracker Line Finder Multifunction Wire Tracker Ethernet LAN Network Cat5 Cat6 with Earphone for Cable Collation, Network Maintenance Collation, Telephone Line Test
Feature
WIRE TRACING MULTIFUNCTION - Fast to locate the breakpoint without wire's cover damage, Find wire on all types of connected operating Ethernet switch /Router/PC terminal. Perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter)And also with the Battery10V-110V positive and negative measurements function.WIRE TRACKER - The Line Finder can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip; In this situation, the wires must be in power-off status, otherwise the units will be damaged; It is recommended to stripe down some of the wires when connecting through the clip; Select "SCAN"; Emitter works properly if the "SCAN" indicator is on; Use the receiver to find target wires.
NETWORK & TELEPHONE LINE TEST - The Line Finder testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection; Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection; Adjust the volume of receiver by pressing the volume rotary knob.
EARPHONES DESIGN - With a pair of Earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment, Adjust the volume knob to make the volume proper and avoid being interfered. Notice that if the sound is low, you should check whether the battery is powered off or not, and the LED flashlight allows operation in dark situation.
24-Month Warranty and You Will Get: 1x Emitter with double RJ11 RJ45 interface, 1x Receiver with BNC interface,1x Pair of Earphone ,1x RJ11 Clip Adapter Cable,1x RJ45 Cable,1x Storage Box,1x English User Manual , Battery Not Included.
10. Wire Tracker, Meterk RJ11 RJ45 Multifunctional Cable Tester Line Finder with NCV Probe for Wire Tracer Toner Ethernet LAN Network Cable Collation, Telephone Line Tester, Continuity Checking
Feature
Professional Wire TrackerTrace RJ11, RJ45, cables or other metal wire (via adapter). Work perfectly when the RJ11 RJ45 cable is on power. It can help you quickly find the target line in many pairs. It equipped with earphone and LED flashlightsNon-contact AC Voltage Detection FunctionNon-contact detection of AC voltage above 48V. When looking for cable lines, it is not necessary to strip the line skin, it is simple and fast, and can determine the position of the line breakpoint
Network Cable Verifying & Line FunctionPlug one side of the cable into the emitter and the other side into the receiver, judge short-circuits, breaking the circuit, open circuit, and crossing. Additional, it can test the line level, positive and negative polarity
Telephone Line TestTest the working status of the telephone line(idle, ringing, and off-hook), only the transmitter can be detected, such as judge TIP and RING line
You Will Get1 x emitter,1 x receiver,1x pair of earphone ,1 x RJ11 clip adapter cable,1 x RJ45 cable,1 x storage bag,1 x user manual (English + French + German + Italy + Spanish), 1 x 6F22/9V battery for emitter, 1 x 6F22/9V battery for receiver.
