It’s not that easy to choose the right zfc39 since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top zfc39 on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best zfc39 on the marketbut dont skip to the end!
Rank
Product Name
Score
Related posts:
Best zfc39 reviews
1. Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
Feature
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
2. Noctua NA-FC1, 4-Pin PWM Fan Controller (Black)
Feature
Compact, highly flexible controller for 4-pin PWM fansWorks as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctuas industrialPPC series
No stop mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors
Includes a 3-way splitter cable for controlling up to 3 fans simultaneously
6-year manufacturers warranty
3. Diymore DC12V 5A PWM 4 Wires PC Fan Temperature Manumotive Speed Controller Module CPU High-Temperature Alarm with Buzzer and Probe for Arduino Heat Sink
Feature
Stall alarm minimum speed: 700-800 rpm.Temperature probe parameters: 50K B = 3950.
10% -100% of the second path and the third path.
Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON).
Thermostat temperature zone error: error depending on the temperature probe, generally 3-5%.
